Read - ELNA XCHANGE Instruction Manual

Xchange Multi-Access Converter
UNDERSTANDING THE XCHANGE BOX SLOTS FOR ELNA PRODUCTS
Slot 2 Elna 8200 Xperience, Elna 8600 Xplore (PCMCIA Cards and .JEF files)
Slot 3 Elna Xquisit and Xquisit II (SmartMedia Cards, .EMD files)
Slot 4 Elna CE20, 8007, 8006 (Memory Cards, .SEW files)

READ

The Read function lets you select a design from a file. You can read designs from a floppy
disk, CD, or your hard drive. The Xchange Box software is conversion software. This means
that you can "read" GNC, PES, HUS, CSD, EMD, SHV, JEF, SEW, XXX and PCS file
extensions into this software. The Read function also reads Zip files without you having to
unzip them first.
Remember, the box is a design file transfer system for sewing formats. You cannot read
bmp, jpg, or any kind of clip art into this program. There is no digitizing software included.
Click the Read button or click File, Open on the navigation bar, and this window appears.
Click to the right of the "Directory" box to open the "Browse For Folder window. Open the file
you wish to read. Click a design and click OK to load it into one of the six squares on the
Converter Box screen. (Or click Cancel to exit the screen.) Click Read again to choose
another design. You can keep selecting designs one by one until all 6 squares are full. "Sort
By" name or extension.
Navigates to beginning of the selected
directory.
Navigates to the previous page of
designs.
Navigates back one design.
Navigates forward one design.
Navigates to the next page of designs.
Navigates to the end of the directory.
11