1. Manuals
  2. Brands
  3. Smart Living Manuals
  4. Outdoor Fountain
  5. SMART SOLAR AquaNura IntelliSolar
  6. Manual

Smart Living SMART SOLAR AquaNura IntelliSolar Manual

Fountain kit with remote control
Hide thumbs

Advertisement

Table of Contents

AquaNura IntelliSolar Fountain Kit
with Remote Control
For use in a variety of
traditional birdbaths,
bowls, ponds, or pools.
Minimum water depth
of 1.5 inch is required.
Solar Panel with
Support Ring (part A)
Foam Float (part D)
In strong sunlight or windy conditions, the water may splash outside of the birdbath.
We recommend the water be regularly topped off and changed to ensure it remains
clean and free from debris.
Important!
Frost / freezing temperatures cause damage. Empty water and store whole product
0°C/32°F
indoors (garage, shed, basement) during winter if you live in an area where temps fall
below 40ºF. Leaving it outside and covering it does not count as winter storage.
Any parts damaged by freezing temps are not covered under warranty.
Solar Kit Components
Battery (part B)
(Attached under part A)
Fountain Head Set (part E)
(360, Nozzle, Bubbler/Extension)
Warning! Important Read Me!
Pump with water sensor
(part C)
ON
OFF
1H
2H
4H
Remote Control (Part F)
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SMART SOLAR AquaNura IntelliSolar and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Smart Living SMART SOLAR AquaNura IntelliSolar

Summary of Contents for Smart Living SMART SOLAR AquaNura IntelliSolar

  • Page 1 AquaNura IntelliSolar Fountain Kit with Remote Control For use in a variety of traditional birdbaths, bowls, ponds, or pools. Minimum water depth of 1.5 inch is required. Solar Kit Components Solar Panel with Battery (part B) Pump with water sensor Support Ring (part A) (Attached under part A) (part C)
  • Page 2 Plug Connection for Pump BEFORE USE: Ensure that the plug connection is water tight.  (Step 1) Line up arrows on plugs (Step 2) Push plugs together until they touch the rubber o-ring.  (Step 3) Slide the threaded cap over the plug.
  • Page 3 Configuration and Assembly The AquaNura can be configured multiple ways to allow use with a variety of birdbaths, in a pond, or pool. Below are some suggestions. You may need to adjust parts based on your birdbath. Must have a minimum water depth of 1.5 inch. Deep Birdbath Shallow Birdbath with Shallow Birdbath...
  • Page 4 How to Remove Support Ring and Foam You may need to remove the plastic support ring and foam based on the depth and shape of your birdbath bowl. To remove the support ring turn the solar panel upside down, hold the circuit box with one hand and with your other hand turn the support ring to unlock it.
  • Page 5 Location  Not Direct Sun Direct Sun No Shad No Screens No Windows No Clouds No Indoor Light Position your solar fountain outside in direct sun. The more hours of direct sun it receives the better it will perform. If the fountain does not receive any direct sun at all then the battery will not be able to get charged resulting in poor performance or not working at all.
  • Page 6 Performance This product is designed primarily to operate in summer months but will also work in spring and autumn provided there is good sunshine. Performance is directly related to the amount and strength received. When in direct sun or the battery is fully charged When not in the sun and the battery is low Weather When Fountain Turned On...

  • Page 7: Manual Start

    Auto On/Off Water Sensor This fountain features our Pump Protection Technology. The pump Water Level is equipped with a built in water sensor that uses 2 metal prongs Sensor on the back side. If the water level gets low due to evaporation or splashing when the 2 metal prongs on the pump are dry the pump will automatically stop running to protect it from running dry and burning out.

  • Page 8: Remote Control

    Remote Control Our IntelliSolar technology comes with a remote so you can control your fountain from a distance. It has buttons for On, Off, 1hr, 2hr, and 4hr hour timers. If you press the ON button and the pump is under water then it will run as long as it can until the battery is depleted.
  • Page 9 How to Pair Remote Control and Solar Panel If you ever lose or break your remote you can order a replacement and pair the new remote to your solar panel. You can also pair 1 remote to multiple panels so you can control several fountains simultaneously.

  • Page 10: Maintenance

    Maintenance To maintain optimum performance regularly clean the solar panel using water or glass cleaner with a sponge or If the fountain head, nozzle, or tubes become blocked, cloth. You can use vinegar to remove hard water limescale. rinse through with water Pump Cleaning Filter cover can simply be pulled apart as shown.
  • Page 11 Troubleshooting for IntelliSolar Fountain with Remote Fountain works. Remote not working. Light on remote illuminates when pressing button: • Fill the fountain full of water so the pump is fully submerged. • If the pump is dry the water sensor will not let the pump run. •...

  • Page 12: Warranty

    Warranty Smart Living Home and Garden warranties your fountain for one (1) year from the original date of purchase from authorized distributors and retailers. The warranty covers parts that are properly installed and regularly maintained.

This manual is also suitable for:

21310024

Table of Contents