Table of Contents
Advertisement
Quick Links
Solar Birdbath / Fountain
* Styles may vary but assembly will be consistent with this manual
The 360˚ fountain head
accessory can be used to
enhance your fountain.
Note: It will only work
effectively in bright sunlight
or if battery is charged.
Water must be regularly topped off. We recommend regularly changing the
water to ensure it remains clean and free from debris.
0°C/32°F
Frost causes damage, store whole product inside during cold weather.
Birdbath & Metal
Stand with Ring
Birdbath
Fountain Heads
Birdbath & Metal
Stand with Bolts
2-Tier
Fountain
The short nozzle can be used to
produce a finer higher
stream of water.
Note: May need to be
removed in bright sunlight to
avoid splashing.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Smart Living smart SOLAR Birdbath
Summary of Contents for Smart Living smart SOLAR Birdbath
- Page 1 Solar Birdbath / Fountain * Styles may vary but assembly will be consistent with this manual Birdbath & Metal Birdbath & Metal Stand with Bolts Stand with Ring 2-Tier Fountain Birdbath Fountain Heads The 360˚ fountain head The short nozzle can be used to accessory can be used to produce a finer higher enhance your fountain.
- Page 2 Place Bowl. Affix bolts and Fill bowl with water. Insert Solar panel/pump. wingnuts, and Open frame. attach bowl. Fill bowl with water. Attach metal ring Place Bowl. Open frame. to frame. Insert Solar panel/pump.
- Page 3 Place the solar If your fountain includes Attach bowl to pedestal. Fill bowl with water. panel/pump assembly Accents, locate the pin Align the marks and turn into the reservoir. on the accent pieces and to lock in place. insert into the holes around the edge of the bowl.
- Page 4 IMPORTANT! Important! When reconnecting the pump and panel take care to ensure that the connectors are water tight. Slightly twist the connectors when pushing together, ensure the red o-ring seal remains in it’s groove and it is not displaced. Position ...
- Page 5 Performance This product is designed primarily to operate in summer months but will also work in spring and autumn provided there is good sunshine. Performance is directly related to the amount and strength of sunlight received. In slightly cloudy conditions your pump will work In bright direct sunlight your pump will work well however fountain height will vary as clouds pass with a consistent fountain height.
- Page 6 Connections Important Ensure connections are water tight. Maintenance To maintain optimum performance, regularly clean the If the fountain head, nozzle, or tubes become blocked, rinse solar panel using water or glass cleaner in conjunction with through with water. a non-abrasive sponge or cloth.
- Page 7 Pump Removal / Assembly 2-Tier Fountain Remove the top tier and turn upside down on a soft surface. As you turn, ensure the solar panel is supported so that it does not fall out. Remove the pump from the connecting tubes and disconnect the cable.
- Page 8 If the product fails due to a defect in material or workmanship, Smart Living will replace the defective parts free of charge. Your fountain is designed for outdoor use and with proper care will last for many years. If over time your fountain develops scratches or minor wear from normal use, you can contact our customer service department for easy to apply one step touch up paint.
Need help?
Do you have a question about the smart SOLAR Birdbath and is the answer not in the manual?
Questions and answers