Table of Contents
Advertisement
Quick Links
Solar-on-Demand Cascading Fountain
* Styles may vary but assembly will be consistent with this manual
Round Cascading Bowl Fountain
The 360˚ fountain head
accessory can be used to
enhance your fountain.
Note: It will only work
effectively in bright sunlight
or if battery is charged.
Water must be regularly topped off. We recommend regularly changing the
water to ensure it remains clean and free from debris.
0°C/32°F
Frost causes damage, store whole product inside during cold weather.
Fountain Heads
Warnings
Square Cascade Fountain
The short nozzle can be used to
produce a finer higher
stream of water.
Note: May need to be
removed in bright sunlight to
avoid splashing.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Smart Living Smart Solar 42605M01
Summary of Contents for Smart Living Smart Solar 42605M01
- Page 1 Solar-on-Demand Cascading Fountain * Styles may vary but assembly will be consistent with this manual Round Cascading Bowl Fountain Square Cascade Fountain Fountain Heads The 360˚ fountain head The short nozzle can be used to accessory can be used to produce a finer higher enhance your fountain.
- Page 2 Cascading Bowls Fountain Assembly Connect tube (1) to underside of solar panel (2). Run tube through top bowl and into column. Connect tube to pump (4) and place pump (4) into column. Run pump cable (3) from column and up through top bowl and connect to solar panel.
- Page 3 Square Cascading Fountain Assembly Fill the bottom section (1) with water to about 4 inches below the rim. The solar panel and pump (2) are pre-assembled into the top section. See pg 7 on how to connect the upper tier components (if necessary).
- Page 4 IMPORTANT! Important! When reconnecting the pump and panel take care to ensure that the connectors are water tight. Slightly twist the connectors when pushing together, ensure the red o-ring seal remains in it’s groove and it is not displaced. Position ...
- Page 5 Performance NOTE: Unit is supplied in off (0) position to protect battery, rotate switch to operate This product is designed primarily to operate in summer months but will also work in spring and autumn provided there is good sunshine. Performance is directly related to the amount and strength of sunlight received. Switch always on (l) This mode should be used if you want your water feature to operate during the day with consisten performance.
- Page 6 Connections Important Ensure connections are water tight. Maintenance To maintain optimum performance, regularly clean the If the fountain head, nozzle, or tubes become blocked, rinse solar panel using water or glass cleaner in conjunction with through with water. a non-abrasive sponge or cloth.
- Page 7 Pump Removal / Assembly To ensure the tubes from the pump are connected to the solar panel, try lifting the solar panel gently by pulling on the solar panel nozzle. If the panel lifts out the tubes are not connected. See illustration below for assembly.
- Page 8 The warranty covers parts that are properly installed and regularly maintained. If the product fails due to a defect in material or workmanship, Smart Living will replace the defective parts free of charge. Your fountain is designed for outdoor use and with proper care will last for many years. If over time your fountain develops scratches or minor wear from normal use, you can contact our customer service department for easy to apply one step touch up paint.
Need help?
Do you have a question about the Smart Solar 42605M01 and is the answer not in the manual?
Questions and answers