miseno MNO183118WS Installation Instruction

Undermount sink stainless stell

Download this manual

UNDERMOUNT SINK STAINLESS STELL

Model: MNO183118WS

BEFORE YOU BEGIN

We recommend consulting a professional if you are unfamiliar with installing plumbing ﬁxtures.

MISENO accepts no liability for any damage to the plumbing, sink, countertop, or for personal injury during installation.

Observe all local plumbing and building codes.

GETTING STARTED

Ensure that you have gathered all the required materials that are needed for the installation.

For solid surface countertop installation only.

Because the sink speciﬁcation measurements are approximate and slight variations may occur, we

highly recommend performing any cabinet fabrication procedures with the sink on site.

CAUTION: Metal edges may be sharp! Use caution when handling.

Safety Work

Safety

Gloves

Glasses

TOOLS AND MATERIALS:

Pencil

Drill

Jigsaw

installation instruction

Damp Cloth

Flathead

Screwdriver

09/2024

Need help?

Do you have a question about the MNO183118WS and is the answer not in the manual?

Page 1 BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing ﬁxtures. MISENO accepts no liability for any damage to the plumbing, sink, countertop, or for personal injury during installation. Observe all local plumbing and building codes.
Page 2 UNDERMOUNT SINK STAINLESS STELL Model: MNO183118WS INSTALLATION 1. Cut out template and place on countertop. Verify the position and desired ﬁt while observing the front overhang that exists on all countertops. 2. With a pencil, lightly trace along template onto the countertop.
Page 3 UNDERMOUNT SINK STAINLESS STELL Model: MNO183118WS 5. Drill the required faucet holes and install the faucet according to the manufacturer’s instructions. 6. Determine placement of sink clip brackets evenly around the sink perimeter. Pre-drill holes according to the method recommended for your countertop material.
Page 4 UNDERMOUNT SINK STAINLESS STELL Model: MNO183118WS 10. Install the mounting clips and tighten until the sink rim is aligned to the countertop. Ensure that the front of the sink is parallel to the countertop. Adjust and retighten if needed. Do not overtighten.