FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
SUBWOOFER FUNCTION 9-10 ONE-YEAR LIMITED WARRANTY...
Page 6
Subwoofer Mains Cable X 2 Remote Control X1...
Page 8
SOURCE Show the input source. (including BT、USB、AUX、LINE、OPT) INDICATOR IN BLUETOOTH MODE In bluetooth mode, the LED will show two words BT and the words will flash when the bluetooth is not paired. The words will illuminate after paired successful. VOLUME Press the button“+”or“–”, the LED will show current volume levels (e.g. V 06). VOLUME OF SUBWOOFER Press the button“SUB +”or“SUB–”of remote control, the LED will show current volume levels of subwoofer (e.g.
Page 9
AUX IN USB Port AUX IN: Connect the analog audio from a device such as a TV, set top box, DVD player, or gaming system. 2 .4G WIRELESS SUBWOOFER PAIR BUTTON Plug the power wire here. Press the “SUB+” button to increase the subwoofer volume. Press the “SUB–”...
Page 10
SUBWOOFER FUNCTION WIRELESS PAIR BUTTON: Press this button to pair with the sound bar. INDICATOR The indicator will go out when the subwoofer is off. When the subwoofer is on, it will illuminate with input signal or it will flash slowly without input signal. When the subwoofer is pairing with the sound bar, the indicator will flash quickly.
Page 11
GOOD BETTER Choose one cable Use an optical cable to connect TV AUX IN Use a RCA cable to connect other device AUX IN...
Page 12
Use a 3.5mm audio cable to connect other device AUX IN Plug the USB into the USB port here AUX IN USB IN...
Need help?
Do you have a question about the ESB206 and is the answer not in the manual?
Questions and answers