Navigating The Utility - Linksys WAP54GPE - Wireless-G Exterior Access Point User Manual

Wireless-g exterior access point
Hide thumbs Also See for WAP54GPE - Wireless-G Exterior Access Point:
Table of Contents

Advertisement

Wireless-G Exterior Access Point
address (192.168.1.245). Or if there is DHCP server connected to the switch, configure it to assign the IP
address in 192.168.1.0/24 subnet. Your PC will get an IP address in the subnet through the DHCP.
3. It is not recommended to use it this way, but you can connect your PC wirelessly to the Access Point
when the DHCP server is connected on the LAN side. It is not recommended because you can easily lose
your connection through configuration changes.
Launch your web browser, such as Internet Explorer or Mozilla Firefox and enter the Access Point's default
IP address, 192.168.1.245, in the Address field. Press the Enter key.
Enter admin in the User Name field. The first time you open the Web-based Utility, use the default
password, admin. (You can set a new password from the Administration - Management tab.) Then click the
OK button.
After setting up the Access Point to use DHCP or manually configure a new IP address, move your Access
Point to the desired network. You will have to use the new IP address the next time you access the Web-
based Utility.

Navigating the Utility

The Web-based Utility consists of the following five main tabs: Setup, Wireless, AP Mode, Administration,
and Status. Additional screens (sub tabs) will be available from most of the main tabs.
The following briefly describes the main & sub tabs of the Utility.
Setup
Enter the Host Name and IP Address settings on this screen.
Wireless
You will use the Wireless tabs to enter a variety of wireless settings for the Access Point.
Basic Wireless Settings. Choose the wireless network mode (e.g. wireless-G), Virtual Local Area
Network (VLAN) settings, SSIDs, and transmit rates on this screen.
Wireless Security. Use this screen to configure the Access Point's security settings.
Wireless Network Access. Use this screen to populate your Access List to permit or block certain MAC
address access to your wireless network.
Chapter 5: Setting Up the Wireless-G Exterior Access Point
Navigating the Utility
15

Advertisement

Table of Contents
loading

Table of Contents