Bullard T3 User Manual

Congratulations
Congratulations on the purchase of your new Bullard T3 L, LT, or
MAX Thermal Imager. The Bullard T3 combines advanced thermal
imaging technology with our expertise in high heat, impact
resistant engineered polymers to bring you the most durable
thermal imager on the market. The T3's innovative, compact design
and logical, easy-to-use interface presents a truly personalized
thermal imaging tool to today's firefighters.
The benefits of using thermal imaging technology as a firefighting
tool encompass nearly every aspect of a firefighter's job. Thermal
imaging is not, however, a technology designed to replace
current firefighting tactics. Rather, it is a tool that
allows the firefighter to be more effective and make
better decisions. Some of the many uses for your
Bullard T3 Thermal Imager include:
• Search and rescue
• Size-Up
• Fire Attack
• Overhaul
• Hazmat
• Wildland firefighting
• Training
• EMS
NOTE
To help us better serve you, please fill out the
warranty card enclosed with your Bullard T3 Thermal
Imager. This will allow us to send you updated versions
of important support information and materials.
WARNING
Read all instructions and warnings before using this product.
Failure to follow this information could result in death or
serious injury. Your thermal imager is like any other tool: it
must be used properly and safely. All users should be trained
on the proper and safe use of thermal imaging prior to using the
T3. This is especially important for users who may use the T3
in hazardous or IDLH (immediately dangerous to life and
health) environments.
Bullard T3 Series
Rear Boot
Polycarbonate
Display Cover
LCD Screen
Power Button
Side Strap
Bullard T3 Thermal Imager
User Manual
Figure 1 (T3MAX shown)
T3LT
Lens Bezel
Lens
Battery