Bullard QXT User Manual

Thank you and congratulations on your purchase
of the Bullard QXT
The Bullard QXT offers numeric and bar temperature measurement as well
as automatic tri-color Super Red Hot (SRH) high heat colorization as standard.
Additional optional features are available including Electronic Thermal Throttle
(ETT) manual colorization, 2X / 4X digital zoom and digital video recording (DVR).
The benefits of using thermal imaging technology as a firefighting tool encompass
nearly every aspect of a firefighter's job. Thermal imaging is not, however, a
technology designed to replace current firefighting tactics. Rather, it is a tool that
allows the firefighter to be more effective and make better decisions. Some of the
many uses for your Bullard QXT Thermal Imager include:
• Search and rescue
• Scene assessment
• Locating the seat of the fire
• Determining the spread of the fire
• Locating hot spots
• Identifying potential flashover situations
• Determining ventilation points
• Determining entry and exit points
• Overhaul
• Hazmat
• Wildland firefighting
• Incident investigation
• Training
Display window
DVR: –
Hold the RIGHT button
to begin or end recording
Overview of the Bullard QXT
Zoom: –
Hold BOTH buttons.
Alternates 2x > 4x > 0x
www.bullard.com
Bullard QXT Thermal Imager
Read all instructions and warnings before using this product.
Your thermal imager is like any other tool. It must be used properly and safely.
All users should be trained on the proper and safe use of thermal imaging
®
prior to using the Bullard QXT Thermal Imager. This is especially important
for users who may use this product in hazardous or IDLH (Immediately
Dangerous to Life and Health) environments.
FAILURE TO FOLLOW THIS INFORMATION COULD RESULT IN DEATH OR
SERIOUS INJURY.
POWER button/ ON indicator
and LED indicator
Germanium Lens
Front Plate
User Manual
�
WARNING
ETT: –
Enter ETT mode with the LEFT Button,
adjust with LEFT and RIGHT.
Depressing both buttons exits ETT.