Dhcp Server; Dynamic Pool Settings - D-Link AirPremier DAP-2360 User Manual

Section 3 - Configuration
The DHCP address pool defines the range of the IP address that can be assigned to stations in the network. A Dynamic
Pool allows wireless stations to receive an available IP with lease time control. If needed or required in the network,
the DAP-2360 is capable of acting as a DHCP server.
Dynamic Host Configuration Protocol (DHCP)
Function Enable/
assigns dynamic IP addresses to devices on
Disable:
the network. This protocol simplifies network
management and allows new wireless devices
to receive IP addresses automatically without
the need to manually assign new IP addresses.
Select Enable to allow the DAP-2360 to function
as a DHCP server.
Input the first IP address available for assignment
IP Assigned
on your network.
From:
The Range of
Enter the number of IP addresses available for
Pool (1-254):
assignment. IP addresses are increments of the
IP address specified in the "IP Assigned From"
field.
Subnet Mask:
All devices in the network must have the
same subnet mask to communicate. Enter the
submask for the network here.
Gateway:
Enter the IP address of the gateway on the
network.
WINS:
Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that
determines the IP address of a network computer that has a dynamically assigned IP address.
D-Link DAP-2360 User Manual

DHCP Server

Dynamic Pool Settings

45