Table of Contents
Advertisement
Quick Links
Alert-iT Pager®
User Manual
This document applies to;
P202 4-Channel & P202 128-Channel
Model:
Product Version: v1
v1.0
Firmware:
Alert-iT and the Alert-iT logo are either registered
trademarks or trademarks of iTs Designs Ltd.
Copyright @ 2024 iTs Designs Ltd.
All rights reserved.
UH1518-ENG P202 Pager User Manual. Version: 0.1.1 [16 Oct 2024]
Advertisement
Table of Contents
Related Manuals for Alert-it Pager
Summary of Contents for Alert-it Pager
- Page 1 Model: Product Version: v1 v1.0 Firmware: Alert-iT and the Alert-iT logo are either registered trademarks or trademarks of iTs Designs Ltd. Copyright @ 2024 iTs Designs Ltd. All rights reserved. UH1518-ENG P202 Pager User Manual. Version: 0.1.1 [16 Oct 2024]...
-
Page 3: Table Of Contents
Charging DISPOSAL OF THE DEVICE AFTER USE Range Testing DECLARATIONS OF CONFORMITY BASIC FUNCTIONS ROUTINE CHECKS Turning the Pager On Daily Checks Waking up the Screen Weekly Checks Turning the Pager Off ALERT-IT LIMITED WARRANTY STATEMENT Responding to Alarm Notifications... -
Page 4: Intended Use
INTENDED USE The Alert-iT Pager is intended to assist in caregiving by notifying the carer to attend the patient in order the verify their wellbeing. Indications for Use This device is designed and manufactured as a social aid intended only to be used as an aid for a caregiver. -
Page 5: Safety
SAFETY Explanation of the markings used on the device and in the documentation Refer to these instructions before use. This is a Medical Device. Importer. Unique Device Identification. Batch Code. Serial Number. Catalogue Number Manufacturer. Date of Manufacture. Authorized representative European Community. -
Page 6: Safety Precautions
Safety Precautions This Alert-iT product has been designed with due regard to reliability and integrity. While it offers a highly vigilant alerting method, it is always possible that a distress condition can go undetected for a variety of reasons (including malfunction) and in life threatening situations it is advisable to use the Alert-iT system in conjunction with additional techniques. -
Page 7: Unintended Adjustment Of Settings
Unintended adjustment of settings Changing the radio address (without also changing it on the receiving equipment) will result in a RF Fail notification on the receiving equipment and any resulting alarm notifications will no longer be received. Serious Incidents Any serious incident that has occurred in relation to the device should be reported to the manufacturer and the competent authority of the member state of the European Union/country in which the user and/or patient is established. -
Page 8: Package Contents
[P/N: P204A] 1x Lanyard [P/N: P204B] 1x 5V USB Charger (Including 1.5m USB Type-C Cable) [P/N: P167*B] Compatible Products The pager is compatible with all of Alert-iT’s Safelink Radio monitors and transmitters. Note: For additional information please contact your equipment provider. -
Page 9: Introduction
The “Pager” is used to alert caregivers to alarm and fault notifications from paired monitors and transmitters. This handbook assumes the pager has been fully configured by your supervisor to work with all the monitors in your “home” or “ward” and has the correct operational protocol enabled. This book gives details of a variety of standard protocols that may be relevant as well as more general control features accessible to the two levels of user Caregivers are notified by visual and audible alerts (if enabled). -
Page 10: System Overview
By default users can turn off the pager and manage monitors. Note: The ability to turn off the pager can be hidden from the “User” settings menu via the “Advanced” > “Further Settings” > “User” screen, by setting “Turn Off”” to “Deny”. -
Page 11: Alarm Notificaions
It is often useful to know how long the patient has been in a distressed state. Upon resetting the alarm at the monitor, the alarm notificaiton is cleared from the pager screen, the elapsed timer is stopped and the event is written to the alarm history log. -
Page 12: Using "Standard" And "Discrete" Mode
Using “Standard” and “Discrete” Mode The pager can be toggled between a “Standard” and a “Discrete” mode on the home screen via the soft key next to the icon. Failsafe Radio Many of Alert-iTs safety critical monitors have a feature called “Securelink” enabled. -
Page 13: Initial Setup
INITIAL SETUP Using the Belt Clip and Lanyard The pager is provided with a detachable belt clip and lanyard that can be used to attach the pager to the users clothing. Charging The pager should be charged before initial use. -
Page 14: Basic Functions
Press the left selection button to turn the pager off. Note: The ability to turn off the pager can be hidden from the “User” settings menu via the “Advanced” > “Further Settings” > “User” screen, by setting “Turn Off”” to “Deny”. -
Page 15: Additional Functions
• Press the left selection button to clear any active alarms from the pager. Note: If the monitor is still turned on and in an alarm state within range of the pager, the pager will re-alarm within 2 minutes. Standard and Discrete Mode The pager can quickly be toggled between a “Standard”... -
Page 16: Recommended Configurations
RECOMMENDED CONFIGURATIONS Due to the wide variety of environments the pager is used in, it is essential that the management team configure the pager appropriatly for their envirnoment. The following section details typical environments and suggested settings that should be configured. -
Page 17: Pairing Monitors
The pager is typically pre-paired to the provided monitors when supplied as a system, however if additonal monitors are required, or if you have a repleacement pager, the following sections can be followed. Monitors that are being turned off during the day to prevent nusciance alarms can be deactivated on the pager. 10.2... -
Page 18: Advanced Settings
This option allows the pager to be forced into silent mode every time the charger is plugged in. This can be useful when the pager is only used during the day and is charged at night. Or if multiple pagers are used, as the pager on charge does then not produce nuciance alarms. -
Page 19: Battery Service Life
Always disconnect the charging cable before cleaning the device. Dry all parts well after cleaning. LIABILITY OF THE MANUFACTURER iTs Designs Ltd. (T/A Alert-iT Care Alarms) is liable to ensure the safety, reliability and performance of the device, provided that: •... -
Page 20: Declarations Of Conformity
ROUTINE CHECKS 17.1 Daily Checks Turned On Wake the display and ensure the pager is turned on prior to starting your shift. Battery Level Ensure the battery has sufficient charge prior to starting your shift. Normal / Discrete Mode Ensure the pager is set to the correct mode prior to use. -
Page 21: Alert-It Limited Warranty Statement
YOUR GUARANTEE By this Guarantee, Alert-iT guarantees the product to be free from defects in materials and workmanship at the date of original purchase for a period of three (3) years from that date. - Page 22 If this exclusion is not permitted or fully permitted by applicable law, Alert-iT excludes or limits its warranties only to the maximum extent permitted by applicable law. Any warranty that cannot be fully excluded will be limited (as far as permitted by applicable law) to the duration of this Guarantee.
-
Page 23: Technical Specifications
Switches and Controls: Keypad with 7 press buttons. Signal Lights: Power Status (Red / Green) Monitor Status (Red / Green) Pager Status (Red / Green?) Sound Pressure Level Range: 50-54 dBA @ 1m. Delay time from ALARM CONDITION to SIGNAL OUTPUT: <... - Page 24 ITs Designs Ltd, T/A: Alert-iT Care Alarms Fernie House (Unit 3) Coalville Business Park Jackson Street Leicester, UK LE67 3NR www.alert-it.co.uk Leisner ApS Korsvangcentret DK - 5610 Assens Denmark For support please contact your equipment provider. EU Importer to add details here, where applicable.
Need help?
Do you have a question about the Pager and is the answer not in the manual?
Questions and answers