Alert-it Pulse Companion Instructions For Use

Thank you for purchasing the
Pulse Companion

Using the Pulse Companion

How to turn on the armband

To turn on the armband press and hold the power button
for 5 seconds.
Adjust the sensor strap and fit where appropriate.
Adjust strap for
optimal fit and
performance

How to turn on the Pulse Companion

To turn on the Pulse Companion, press and hold
•
• •
button for 3 seconds.
The Pulse Companion will automatically pair to the
armband supplied with this equipment.
The LED will flash green rapidly when connecting.
The LED on the Pulse Companion will now flash green
every 4 seconds, you are now in monitoring conditions.
Press and hold
for 5 seconds
Status lights
Green LED will flash
to confirm connection

How to turn on the pager

Turn on the pager by pressing and holding the menu
button for 3 seconds a pip noise will sound.
Pulse 00 should appear on the screen every 8 seconds
after start up.
Press and hold
•
• •
button for
3 seconds
Instructions for use
"Pulse 00" will
appear onscreen
Press and hold until
screen turns on
"Battery" or "charging"
will appear in normal
mode.