Getting Started - D-Link AirPremier N DAP-2310 User Manual

Section 2 - Installation
1. Connect the power adapter to the receptor on the rear panel of the DAP-2310 and then plug the other end of the
power adapter to a wall outlet or power strip. The power LED will turn ON to indicate proper operation.
2. Using an Ethernet cable, insert one end of the cable to the LAN port on the rear panel of the DAP-2310 and the other
end of the cable to a switch or router's LAN port .
Note: You can also connect the DAP-2310 directly to the computer that will be used for configuration. The LAN LED
will illuminate to indicate a proper Ethernet connection.
3. Computers with 802.11 b/g/n wireless adapters can connect to the DAP-2310.
D-Link DAP-2310 User Manual

Getting Started

Desktop
Laptop
DAP-2310
RESET
LAN 5V 2A
2
RESET
LAN 5V 2A
or
1
Switch
14