Wds Mode - D-Link AirPremier N DAP-2310 User Manual

Section 3 - Configuration
In WDS mode, the DAP-2310 wirelessly connects multiple networks, without functioning as a wireless AP.
Wireless Band: Select 2.4GHz from the drop-down menu.
Mode: WDS is selected from the drop-down menu.
Network Name Service Set Identifier (SSID) is the name designated
(SSID):
for a specific wireless local area network (WLAN).
The SSID's factory default setting is dlink. The SSID
can be easily changed to connect to an existing
wireless network or to establish a new wireless
network.
SSID Visibility:
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Auto Channel
Enabling this feature automatically selects the
Selection: channel that will provide the best wireless
performance. This feature is not supported in WDS
mode.
Channel: All devices on the network must share the
same channel. To change the channel, use the
drop-down menu to make the desired selection.
Channel Width: Use the drop-down menu to choose 20 MHz or
Auto 20/40 MHz.
Remote AP
Enter the MAC addresses of the APs on your
MAC Address: network that will serve as bridges to wirelessly
connect multiple networks.
D-Link DAP-2310 User Manual

WDS mode

21