Page 1
Altec Lansing Computer Speaker System User Guide ACS495 IMPORTANT If you experience any difficulties with your computer speaker system, please call us. It may be a simple problem that we can help you solve right over the phone. Call our customer service number for assistance before returning the speakers to your retailer.
Page 2
Power Sources — The appliance should be connected to a power supply call the Altec Lansing service line for assistance. only of the type described in the operating instructions or as marked on...
Page 3
Description (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to The ACS495 is a Pro Logic powered surround sound prevent blade exposure. speaker system composed of two satellite speakers and a subwoofer.
Page 4
See Figure 2. If functions will be reduced when operating from the top power to the ACS495 is turned on/off by a main power panel controls. switch, some “pop” or static sounds may be heard through the speakers.
Page 5
Make connections as shown in Figure 1. For easy insertion of the DIN connector notice that the arrow must face up. Do not put the AC power plug into the wall outlet before all connections are made. ACS495 Connections – Rear View of Cabinets Figure 1...
Page 6
All stereo information is heard from the satellite speakers. ACS495. When the The subwoofer contains no stereo information and lecturer wishes to sound is non-directional. As a result, the subwoofer does...
Page 7
Specifications ACS495 Power Requirements Drivers (satellites) One 3 inch mid-range USA/CANADA Model 120 Volts 60Hz AC inch tweeter MAX Power Consumption 175 Watts Drivers (subwoofer) One 6 inch long throw woofer Frequency Response 32Hz – 20kHz UL/CUL (CSA)/CE Approved Satellite Power 20 Watts RMS per channel at <0.8% THD...
Page 8
One Year Limited Warranty Altec Lansing Technologies, Inc. warrants to the end user Altec Lansing Technologies, Inc. obligation under this that all of its computer speaker systems are free from warranty does not apply to any defect, malfunction or defects in material and workmanship in the course of...
Need help?
Do you have a question about the ACS495 and is the answer not in the manual?
Questions and answers