Xiaomi Mi Bedside Lamp 2 Manual

Introduction

Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Product Overview

Read this manual carefully before use and retain it for future reference.

The Mi Bedside Lamp 2 uses high-quality LED chips with a professional optical structure, combined with a natural light mixing algorithm, excellently bringing out the light of various colours and offering you the different colours you want.
Moreover, it provides a newly designed high-tech feeling touch control.

Using the Lamp

Installation

Plug the power cable into the charging port at the base and connect the adapter to a power supply.

* It's recommended tat you place it on a nightstand or a desk.

Instructions

Functions

1. Mode Button
   • Press: switch the default light colour for the current mode.
   • Press and hold for 2 seconds: switch between colour or colour temperature mode.
2. Brightness Adjustment Bar
   • Swipe up/down to adjust the brightness.
   • When the light is off, touch the brightness bar to turn on the light, and the brightness level will correspond to the touched position.
3. Power Button
   • Press: on/off.
   • When the light is on, press and hold the power button for 2 seconds to enable the turn-off delay feature (the default delay is 15 minutes, which can be set in the app.

Advanced Features

Night Light Function
You can set the time period via the mobile app to enable the night light mode. When turning on the lamp with the night light mode enabled, the lamp will automatically enter into night light mode to avoid excessive brightness to the eyes. When turning on the lamp during nonnight light periods, the lamp will automatically return to the state saved in normal mode.

Connect with Mi Home / Xiaomi Home App
The product works with Mi Home / Xiaomi Home app *. Control your device, and interact it and other smart home devices with Mi Home / Xiaomi Home app.
Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search „Mi Home / Xiaomi Home" in the app Store to download and install it.
Open Mi Home / Xiaomi Home app, tap „+" on the upper right, and then follow prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.

Note:
The version of the app might have been updated, please follow the instructions based on the current app version.

Apple HomeKit Smart Control

1. Open the Home app on your iPhone or iPad.
2. Tap „Add Accessories" and follow the instructions in the app to scan the QR code on the product base, or enter the 8-digit setup code above the QR code to grant the Apple Home app access.
   * Make sure a Wi-Fi network with Internet access is available (this product does not support 5G networks). To control this HomeKit-compatible accessory, it is recommended that you use iOS 9.0 or above. The HomeKit setup code is listed on the product base, do not lose it. After restoring factory settings, you will need the HomeKit setup code again to add the accessory. iPad and iPhone are the trademarks of Apple Inc., and they are registered in the United States and other countries.

Link a Lamp with Google Assistant
Add the Mi Home / Xiaomi Home skill to the Google Assistant app, to control devices connected to Mi Home / Xiaomi Home from Google Assistant.

1. Tap in the Google Assistant app, search for „Mi Home / Xiaomi Home", tap „Link", and sign in with your Xiaomi account.
2. Tap in Settings > Home Control to add a device and follow the on-screen instructions. Once the accounts are linked, you can control the Lamp from Google Assistant.

Link a Lamp with Amazon Alexa
Add the Mi Home / Xiaomi Home skill to the Amazon Alexa app, to control devices connected to Mi Home / Xiaomi Home from Amazon Alexa.

1. Tap in the Amazon Alexa app, then tap „Skills & Games", search for „Mi Home / Xiaomi Home", select the correct skill and tap „Enable". Then sign in with your Xiaomi account.
2. After successfully linking the accounts, tap DISCOVER DEVICES to add the device, and follow the on-screen instructions. Once the accounts are linked, you can control the Lamp from Amazon Alexa.
   Note: The name (Mi Home or Xiaomi Home) varies by selected language or regions.

Specifications

This product contains a light source of energy efficiency class <E>.
Replaceable (LED only) light source by a professional. Replaceable control gear by an enduser.

Product Features

Restore Factory Settings

Simultaneously press and hold the power button and mode button for 5 seconds, until the lamp starts circulating through the colours red, green, and blue, then release the buttons. After the circulating colours end, the lamp will automatically restart, and restoring factory settings will be completed.
* When using the bedside lamp in a new network environment, you need to restore factory settings and connect to the network again.

Precautions

Make sure the voltage is consistent with the product's working voltage before use. Using the incorrect voltage may damage the product and cause a potential safety hazard.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
The lamp will produce heat during operation, please use it in a well-ventilated area so that heat can dissipate.
Do not use non-standard adapters to avoid product damage or safety hazards.
Place the lamp steadily and do not tip it over during use.
Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user.