Specifications - Canon WFT-E2 Instruction Manual

Wireless file transmitter
Hide thumbs Also See for WFT-E2:
Table of Contents

Advertisement

Specifications

Type
Type:
Network protocols:
Wireless LAN
Standards compliance:
Transmission method:
Transmission range:
Transmission frequency:
Connection method:
Security:
Wired LAN
Standards compliance:
USB Connection
Connectable Devices:
Interfaces
Camera:
Wired LAN:
External device:
Image Capture Capacity
* Using a fully charged LP-E4
* Testing based on Camera & Imaging Products Association (CIPA) standards
* Fewer images can be captured when transferring images over wireless
* Fewer images can be captured when using bus-powered external media or
Image transfer accessory compatible with IEEE 802.11b/g wireless
LAN and Ethernet (wired LAN). Can be connected via USB to external
media and GPS devices.
FTP, PTP, and HTTP
ARIB STD-T66 (Low-Power Data Communication System/Wireless
LAN System), IEEE 802.11b, and IEEE 802.11g
DS-SS modulation (IEEE 802.11b) and OFDM modulation (IEEE
802.11g)
Approx. 150 m / 492 ft.
* With no obstructions between the transmitting and receiving
antennas and no radio interference
* With a large, high-performance antenna attached to the wireless LAN
access point
WFT-E2: 2,412 - 2,472 MHz (central frequency, 13 channels total)
WFT-E2A: 2,412 - 2,462 MHz (central frequency, 11 channels total)
Infrastructure or ad hoc (IEEE 802.11b/g)
Authentication method: Open, shared key, WPA-PSK, and WPA2-PSK
Encryption: WEP, TKIP, AES, and IPsec
IEEE 802.3u (Ethernet 100 Base-TX)
External media or GPS devices
Extension system terminal
Ethernet RJ-45 port
Hi-Speed USB port (for connecting external media and GPS devices)
At Normal Temperature
(23°C / 73°F)
1,400
LAN.
GPS devices.
Approx. number of images
At Low Temperature (0°C / 32°F)
1,100
9
89

Advertisement

Table of Contents
loading

Table of Contents