How to Get the Assembly Video Search with the Model No. Step 1 Step2 Scan the QR code. (on the bottom left corner of the title page) HOGA-F207 Installation Video Note: If you can't find the assembly video, please contact us. P-01...
Page 3
We recommend using hand tools for assembly. If an electric screwdriver is used, reduce power and torque to avoid damage to the product. Install the Anti-Tip Straps Using the anti-tip straps can reduce the risk of tipping over, but can not eliminate it. P-02...
Page 4
Caution Make sure all parts are included. Most board parts are labeled or stamped on the raw edge. Contact us for a free replacement if you encounter any damaged or missing parts. P-03...
Hardware List 1 pc 6 pcs 7 pcs 49 pcs 15 pcs 13 pcs 49 pcs 13 pcs 1 pc 13 pcs 5 pcs 11 pcs 37 pcs 1 pc 6 pcs 5 pcs P-05...
Page 7
Installation of Cams and Pins Screw the pin into the hole. To set the cams correctly, ensure that the arrow on the cam is opening to the hole of the pin it is locking. Lock the cam by turning the cam head with a screwdriver until it is tightened.
Need help?
Do you have a question about the HOGA-F207 and is the answer not in the manual?
Questions and answers