Lumex 7921RA Assembly & Operation Instructions

Info: The most current version of these instructions can be found online at www.grahamfield.com.
IMPORTANT SAFETY INFORMATION: PLEASE READ
WARNING: Important! Read and understand these instructions before
assembling or using the Bath Seat. If you do not understand any part of these
warnings, cautions or instructions, contact a healthcare professional for
direction in the use of this product. If the Bath Seat is not properly assembled
and adjusted, personal injury and damage to the Bath Seat could result.
WARNING: If components are damaged or missing, contact your distributor
immediately. DO NOT use substitute parts. Use only Lumex replacement parts.
Non-Lumex replacement parts could cause personal injury and damage to the
Bath Seat.
WARNING: Notice for California Customers- California Proposition 65
WARNING: This product contains a chemical known to the State of California
to cause cancer and reproductive or developmental harm.
WARNING: GF Health Products, Inc. assumes no responsibility for any damage or
injury caused by improper assembly or use of this product.
INTENDED USE
The 7921RA / 7931RA Bath Seat is intended for use by individuals who require seating support
while bathing or showering. It is designed to be placed fully inside the bathtub or shower.
Contraindications
WARNING: This product has a weight limit of 350 lb, EVENLY DISTRIBUTED.
WARNING: DO NOT use this product as a transfer bench or climbing device.
WARNING: Use this product only with tub floors wider than 18
ASSEMBLY
s NOTICE: Do not overtighten screw knobs during Bath Seat assembly.
1. Remove the Bath Seat from the box and place it on a flat, dry surface.
fig. 1
2. Locate the seat legs (see figure 1).
3. Locate the shortest screw knob and a curved washer (see figure 2).
7921RA-INS-LAB-RevB14
7921RA / 7931RA: BATH SEAT
ASSEMBLY & OPERATION INSTRUCTIONS
PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE USE
PARA INSTRUCCIONES EN ESPAÑOL, VÉASE LA PÁGINA 5
fig. 2 fig. 3
/
3
".
4
fig. 4
1