REVENTON HMI VOLT User Manual

Programmable controller HMI VOLT
User Guide
Welcome
Thank you for buying the product! Your new controller will provide
years of reliable service. Using this digital device will provide more
uniform comfort in your home through the seasons. Please read
this manual for complete instructions on installing and operating
your device. If you require further assistance, please feel free
to contact directly with Reve nton Group Sp. z o.o.
In the box you will find
- programmable controller HMI VOLT
- user guide
- external sensor NTC
- screws (2 pieces)
Technical data
Sensor: NTC 10k
Temp. range: 5 - 35°C Power consumption: < 1.5
Timing error: <1%
Power supply: 95 ~ 240 VAC, 50 ~ 60 Hz
Maximal current load:
•
fan: 5 A (inductive)
•
L1&L2: 5A(inductive)
Shell material: PC (fireproof)
Dimensions: 86 x 86 x 13,3 mm
Installation box: 86 x 86 mm lub Ø 60 mm
Ambient temperature: t = 0 - 45°C, ϕ = 5-95%
Storage temperature: -5 - 55°C
RS485/Modbus RTU communication
Degree of protection (housing): IP 20
Degree of protection (external sensor): IP 68
About device
Programmable controller HMI is designed to on/off control
the fans and valves in fan coil unit applications
via comparison of the room temperature and setting
temperature as reaching the aim of comfort and saving
energy. It can work in heating, cooling or ventilation mode.
The item is microprocessor based device with LCD display.
Features of the controller
•
Modern design similar as a cell phone
•
Beautiful Frame CHROME creates elegant life
•
Acrylic lenses to avoid the finger scratch
•
Touch Button makes simple operation
•
Large screen display with backlight is easy to read -
even in the dark
•
Six periods program schedules maximize comfort
and economy
•
One-touch temp control overrides program schedule
•
Precise comfort control keeps temperature within
0.5°C of the level you set
•
Internal and external sensor selectable is suitable
for any place
•
Data memory when device is off
•
Easy installation
•
86 x 86 mm hidden box and european 60 mm round
box is available
Home screen quick reference
Accuracy: ± 0.5°C
W
Operation
1. Setting the temperature
a. In the mode of programmable set temperature could
not be adjusted. If the user want to change, please
reprogram.
b. In the mode of manual, press
temperature. Manual mode is signalised by icon
2. Setting lock
Press and hold
The icon
Press and hold
the screen.
3. Setting the fan
Press
on temperature difference between set and current
temperature, fan automatically adjusts the stage), HIGH,
MED, LOW.
4. Setting the system mode
Press to change the system mode COOLING, HEATING
and VENTILATION. In the mode of VENTILATION, the valve
is off but the fan runs.
or
and for 5 sec. to lock the screen.
will display on the screen.
and again for 5 sec. to unlock
to select the fan speed AUTO (depending
to set
.