Advertisement
Quick Links
14-014
mjfx armor Bumper
installation instructions
included:
tools needed:
DS Bumper
17mm socket
Mounting Bracket A
Drill/wrench
Bracket B
Mounting Hardware
Madjax recommends professional installation. If you choose to not have this product installed by a professional,
1
we highly recommend that you exercise caution, care, and patience when installing this product.
Detach Factory DS Bumper by removing
the four factory bolts shown. Retain top
2 bolts and nuts that attach front cowl to
frame. Factory bumper hardware will not
be used.
MJFX Armor Bumper
2
Slide Bracket B behind frame as shown.
This will attach to Bracket A in step 3.
Mounting Bracket A
Bracket B
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for MadJax MJFX 14-014
Summary of Contents for MadJax MJFX 14-014
- Page 1 Bracket B MJFX Armor Bumper Madjax recommends professional installation. If you choose to not have this product installed by a professional, we highly recommend that you exercise caution, care, and patience when installing this product. Detach Factory DS Bumper by removing the four factory bolts shown.
- Page 2 Bracket B using (4) 30mm bolts and tighten. If installing a MJFX Force 3000 Winch or MadJax LED bar, see following page before proceeding to Step 4. Using remaining (6) 30mm bolts to attach bumper to mounting bracket as shown.
- Page 3 ® Madjax products are aftermarket parts and are not original equipment parts. Madjax is not connected to, affiliated with, sponsored by, or endorsed by either Textron Innovations, Inc., Ingersoll Rand, Inc., Yamaha Golf Cart Company, or any of their parent or subsidiary companies.
Need help?
Do you have a question about the MJFX 14-014 and is the answer not in the manual?
Questions and answers