Huawei eKitEngine USG6000E-S Series Hardware Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Switch
  5. eKitEngine USG6000E-S Series
  6. Hardware manual
Huawei eKitEngine USG6000E-S Series Hardware Manual

Huawei eKitEngine USG6000E-S Series Hardware Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
eKitEngine USG6000E-S Series
Hardware Guide
Issue
01
Date
2023-11-21
HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the eKitEngine USG6000E-S Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Huawei eKitEngine USG6000E-S Series

Summary of Contents for Huawei eKitEngine USG6000E-S Series

  • Page 1 USG6000E-S Series Hardware Guide Issue Date 2023-11-21 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...

  • Page 3: Table Of Contents

    2.5.2.5 SFP-FE-SX-MM1310..............................57 2.5.2.6 eSFP-FE-LX-SM1310..............................58 2.5.3 1Gbps SFP Copper Modules............................59 2.5.3.1 SFP-1000BaseT................................59 2.5.4 1Gbps eSFP Optical Modules............................60 2.5.4.1 OSU015N00..................................60 2.5.4.2 S-SFP-GE-LH40-SM1310.............................. 60 2.5.4.3 S-SFP-GE-LH40-SM1550.............................. 61 2.5.4.4 S-SFP-GE-LH80-SM1550.............................. 62 Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 4 3.3.4 Connecting a Console Cable............................121 3.3.5 Connecting an Ethernet Cable............................123 3.3.6 Installing Optical Transceivers and Connecting Optical Fibers............... 124 3.3.7 Connecting a Power Adapter............................127 3.3.8 Powering On or Off the USG6000E-S03......................... 128 Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 5 A.2.1 Device Position................................173 A.2.2 Humidity, Temperature, and Cleanness........................174 A.2.3 ESD Requirements................................175 A.2.4 Lightning Protection and Grounding........................177 A.2.5 Power Supply..................................179 A.2.6 Electromagnetic Protection............................182 A.3 Fault Tag....................................183 Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 6: Info-Finder

    ● 3D model: Using this function, you can query product images, product overview, and component insertion/removal videos, enabling you to quickly obtain product information in one-stop mode. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 7: Hardware Overview

    ● The device series number can be provided using laser marking on the panel or film silkscreen. The device functions are the same regardless of the series number presentation mode. 2.1.1 USG6000E-S03 Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 8 USG6000E-S03- 02355YXH USG6000E-S03- V600R007C20SPC AC Host(10*GE RJ45+2*10GE SFP +,1*Adapter,Includ e SSL VPN 100 Users) Appearance Figure 2-1 Appearance of the USG6000E-S03 (front view) Figure 2-2 Appearance of the USG6000E-S03 (rear view) Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 9 ● Houses a Micro SD card to store logs and reports. MAC label Uniquely identifies the MAC address of the device, which is required during network forwarding configuration. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 10: Indicators And Buttons

    Table 2-3 Indicators on the USG6000E-S03 Silkscreen Name Color Status Description Power Green Steady on The power indicator module is working properly. The power module is faulty or the device is not powered on. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 11 CLOUD CLOUD Green Steady on Connected to indicator the cloud management platform. Green Blinking four Connecting to times every the cloud second (4 Hz) management platform, transmitting or receiving data. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 12 Optical port Green Steady on The port link indicator is connected. Green Blinking (12 The port is sending or receiving data. No link is established on the port. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 13 Ports Figure 2-5 Ports on the USG6000E-S03 1. Clip hole 2. Power 3. GE electrical 4. 10GE optical 5. Micro SD receptacle port port card slot Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 14 Power receptacle The receptacle 36 W Power connects to the Adapter tuning fork plug (02221468) of the power adapter. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 15 (0 to 1) autosensing Optical Ethernet optical Modules ports, numbered ● 1Gbps SFP from Copper XGigabitEthernet Modules 0/0/0 to ● 1Gbps eSFP XGigabitEthernet Optical 0/0/1. Modules ● 10Gbps SFP+ Optical Modules Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 16 USB flash drive you to insert an USB flash drive for system software upgrades. For details on upgrades through USB flash drives, refer to the Upgrade Guide delivered with the device. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 17: Technical Specifications

    9.84 in. x 8.27 in.) Dimensions with packaging (H x W x 110 mm x 470 mm x 335 mm (4.33 in. D) [mm(in.)] x 18.5 in. x 13.19 in.) Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 18 DDR4 2 GB NOR Flash 64 MB NAND Flash 2 GB Hard disk Optional. Purchase one 64-GB micro SD card from Huawei as required. Console port RJ45 Maximum power consumption [W] 22.3 W Maximum heat dissipation [BTU/hour] 76.08 BTU/hour MTBF [years] 57.29 years...

  • Page 19: Usg6000E-S13

    AC Host(2*GE RJ45 + 8*GE COMBO + 2*10GE SFP+,1 AC power,Include SSL VPN 100 Users) Appearance Figure 2-6 Appearance of the USG6000E-S13 (front view) Figure 2-7 Appearance of the USG6000E-S13 (rear view) Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 20 Uniquely identifies the MAC address of the device, which is required during network forwarding configuration. SN label Uniquely identifies the device, which needs to be provided for the local technical support personnel to apply for a license. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 21 Arrowheads of optical ports show the positions of the ports. A down arrowhead indicates a port in the upper part, and an up arrowhead indicates a port in the lower part. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 22 If the system starts with dual power modules but one power module is not powered on, the System indicator is steady red, but the system is operating properly. The system is not running. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 23 Reserved. indicator CLOUD CLOUD Green Steady on Connected to indicator the cloud management platform. Green Blink four Connecting to every second the cloud (4 Hz) management platform, transmitting or receiving data. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 24 The link of for optical the port is ports connected. The link of the port is disconnected. Indicator for Green Steady on The link of MGMT port the port is connected. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 25 RST button. To enable this function again, run the undo factory- configuration prohibit command. Ports Figure 2-10 Ports on the USG6000E-S13 Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 26 USG6000E-S Series Hardware Guide 2 Hardware Overview 1. Combo port 2. 10GE optical 3. GE electrical 4. SSD card 5. USB port port port slot 6. Console port 7. MGMT port Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 27 You can use the combo enable { copper | fiber } command to set the working mode of combo ports according to network requirements. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 28 Ethernet Cable (8 to 9) autosensing Ethernet electrical ports, numbered from GigabitEthernet 0/0/8 to GigabitEthernet 0/0/9. The device is connected to the WAN or cloud management center using a network cable. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 29 USB ports allow USB flash drive you to insert USB devices for system software upgrades. For details on upgrades through USB devices, refer to the Upgrade Guide delivered with the device. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 30 (RJ45) on the device to the COM port on your PC and use a serial port terminal program on your PC to access, configure, and manage the device. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 31: Power Supply System

    The heat dissipation system uses one FAN-023A-B module to dissipate heat for the system. From the front panel, the device provides a front-to-rear air flow. The fan module locates at the air exhaust of the system. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 32: Technical Specifications

    Weight with packaging [kg(lb)] 7.93 kg (17.48 lb) Weight without packaging [kg(lb)] 5.95 kg (13.12 lb) 1 CPU, 4 cores/CPU, up to 1.4 GHz Memory DDR4 4 GB NOR Flash 64MB Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 33 5% RH to 95% RH, non-condensing [RH] Storage relative humidity [RH] 5% RH to 95% RH, non-condensing Long-term operating altitude [m(ft.)] 0 m to 5000 m Storage altitude [m(ft.)] 0 m to 5000 m Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 34: Power Modules

    2.2.1 HW-120300D1D (36W AC Power Module) Overview Table 2-13 Basic information about the HW-120300D1D Item Details Description 36W AC Power Module Part Number 02221468 Model HW-120300D1D Appearance Figure 2-12 Appearance of the HW-120300D1D Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 35: Functions And Features

    2.12 in. x 3.92 in.) Weight without packaging [kg(lb)] 0.205 kg (0.45 lb) Number of inputs Rated input voltage [V] 100 V AC to 240 V AC (50 Hz/60 Hz) Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 36: Pac60S12-Ar (02312Sle-001: 60W Ac Power Module)

    2.2.2 PAC60S12-AR (02312SLE-001: 60W AC Power Module) Overview Table 2-17 Basic information about the PAC60S12-AR Item Details Description 60W AC Power Module Part Number 02312SLE-001 Model PAC60S12-AR Appearance Figure 2-13 Appearance of the PAC60S12-AR Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 37 Green Steady on The output of indicator the AC power module is normal. Green Blinking The output power is out of range. For example, overvoltage, overcurrent, or short circuit has occurred. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 38 Power Cables. Clip hole The hole is used to install the power cable clip, which is used to bind and fix the power cable. The power cable clip is installed before shipment. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 39 Hot swap The device has 1+1 power module redundancy. You can hot-swap a 60 W power module without interrupting device operation. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 40: Pac60S12-Ar (02312Sle: 60W Ac Power Module)

    Type of power cables 2.2.3 PAC60S12-AR (02312SLE: 60W AC Power Module) Overview Table 2-23 Basic information about the PAC60S12-AR Item Details Description 60W AC Power Module Part Number 02312SLE Model PAC60S12-AR Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 41 Table 2-24 Mappings between PAC60S12-AR and product models Product Product Model First Supported Version USG6000E-S13 USG6000E-S13-AC V600R007C20SPC605 (02355YXM) Panel Figure 2-16 Panel of the PAC60S12-AR 1. Power status indicator 2. Power receptacle 3. Clip hole Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 42 AC input undervolta ge has occurred. ● The output of the AC power module is out of range. For example, undervolta ge, or overtempe rature has occurred. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 43 Intermittently stops output and automatically restores output after the overvoltage condition is removed. Output short circuit protection Intermittently provides output and automatically restores normal output after the output short circuit is removed. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 44: Fan Modules

    Rated output power [W] 60 W Hot swapping Supported Type of power cables 2.3 Fan Modules This chapter describes hardware information for all fan modules of the USG6000E, including hardware appearance, and technical specifications. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 45: Fan-023A-B (Fan Box,Fan-023A-B,Fan Box,Fan Box(B,Fan Panel Side Exhaust))

    Figure 2-17 Appearance of the FAN-023A-B Version Mapping Table 2-30 Mappings between FAN-023A-B and product models Product Product Model First Supported Version USG6000E-S13 USG6000E-S13-AC V600R007C20SPC605 (02355YXM) Panel Figure 2-18 Panel of the FAN-023A-B Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 46 For details, see SRM_ENTITY_ 1.3.6.1.4.1.201 1.5.25.219.2.6. hwFanRemov e_137216, SRM_ENTITY_ 1.3.6.1.4.1.201 1.5.25.219.2.6. hwFanInvalid_ 139264, SRM_ENTITY_ 1.3.6.1.4.1.201 1.5.25.219.2.6. hwFanInvalid_ 139267. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 47 40 mm x 40 mm x 100.3 mm (1.57 in. x D) [mm(in.)] x 1.57 in. x 3.95 in.) Weight without packaging [kg(lb)] 0.1 kg (0.22 lb) Number of fans Typical power consumption [W] 7.2 W Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 48: Storage Devices

    2.4.1.1 M.2-SATA240G-A (M.2 SSD,SATA 6Gb/s-240GB,Hot-Swappable) Overview Table 2-34 Basic information about the M.2-SATA240G-A Item Details Description M.2 SSD,SATA 6Gb/s-240GB,Hot- Swappable Part Number 02312DLK Model M.2-SATA240G-A Appearance Figure 2-19 Appearance of the M.2-SATA240G-A Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 49 The hard disk is in position. Green Blinking Data is being read from or written to the hard disk. The hard disk is not detected or the device is not powered Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 50: M.2-Sata64G-A (M.2 Ssd,Sata 6Gb/S-64Gb,Hot-Swappable)

    Maximum heat dissipation [BTU/hour] 5 BTU/hour 2.4.1.2 M.2-SATA64G-A (M.2 SSD,SATA 6Gb/s-64GB,Hot-Swappable) Overview Table 2-39 Basic information about the M.2-SATA64G-A Item Details Description M.2 SSD,SATA 6Gb/s-64GB,Hot- Swappable Part Number 02312DLJ Model M.2-SATA64G-A Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 51 Silkscreen Name Color Status Description ALM indicator Orange Steady on The hard disk fails. The hard disk is running properly. RUN indicator Green Steady on The hard disk is in position. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 52 0.98 in. x 4.33 in.) Weight without packaging [kg(lb)] 0.1 kg (0.22 lb) Storage capacity [GB] Port type SATA Maximum power consumption [W] 2.7 W Maximum heat dissipation [BTU/hour] 2.7 BTU/hour Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 53: M.2-Sata64G-B (M.2 Ssd,Sata 6Gb/S-64Gb,Hot-Swappable)

    Figure 2-23 Appearance of the M.2-SATA64G-B Version Mapping Table 2-45 Mappings between M.2-SATA64G-B and product models Product Product Model First Supported Version USG6000E-S13 USG6000E-S13-AC V600R007C20SPC605 (02355YXM) Panel Figure 2-24 Panel of the M.2-SATA64G-B Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 54 Supports hot swap. Restrictions and limitations Do not low-level format the hard disk. Otherwise, the hard disk cannot be used. Technical Specifications Table 2-48 Technical specifications of the M.2-SATA64G-B Item Specification Form factor Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 55: M.2-Sata960G-A (M.2 Ssd,Sata 6Gb/S-960Gb,Hot-Swappable)

    Part Number 02313XEF Model M.2-SATA960G-A Appearance Figure 2-25 Appearance of the M.2-SATA960G-A Version Mapping Table 2-50 Mappings between M.2-SATA960G-A and product models Product Product Model First Supported Version USG6000E-S13 USG6000E-S13-AC V600R007C20SPC605 (02355YXM) Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 56 Functions and Features Table 2-52 Functions and features of the M.2-SATA960G-A Functions and Features Description Basic functions Storage log. Hot swap Supports hot swap. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 57: Optical/Electrical Modules

    ● A USG must use optical modules that have been certified for use. Non-certified optical modules cannot ensure transmission reliability and may affect service stability. Huawei is not liable for any problem caused by the use of non- certified optical modules and will not fix such problems.
  • Page 58 How to Identify Huawei-Certified Optical Modules Method 1: Check for "HUAWEI" on the label If an optical module has been certified by Huawei, its label contains "HUAWEI", as shown in Figure 2-27.

  • Page 59: 100Mbps Sfp Optical Modules

    Figure 2-27 "HUAWEI" on the label of a Huawei-certified optical module Method 2: Run the display esn interface command If Certified is YES, and VendorName is huawei in the display esn interface command output, the optical module has been certified by Huawei. Otherwise, it is not a Huawei-certified optical module.

  • Page 60: S-Sfp-Fe-Lh80-Sm1550

    Receiver Optical Characteristics Rx sensitivity (AVG) [dBm] -37 dBm Overload power (AVG) [dBm] -10 dBm 2.5.2.3 SFP-FE-LX-SM1310-BIDI Table 2-56 SFP-FE-LX-SM1310-BIDI specifications Item Value Basic Information Module name SFP-FE-LX-SM1310-BIDI Part Number 02315203 Model SFP-FE-LX-SM1310-BIDI Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 61: Sfp-Fe-Lx-Sm1550-Bidi

    SFP-FE-LX-SM1550-BIDI. 2.5.2.4 SFP-FE-LX-SM1550-BIDI Table 2-57 SFP-FE-LX-SM1550-BIDI specifications Item Value Basic Information Module name SFP-FE-LX-SM1550-BIDI Part Number 02315202 Model SFP-FE-LX-SM1550-BIDI Form factor eSFP Application standard 100BASE-BX Connector type Optical fiber type Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 62: Sfp-Fe-Sx-Mm1310

    Optical fiber type Working case temperature [°C(°F)] 0°C to 70°C (32°F to 158°F) Transmission rate [bit/s] 100 Mbit/s Target transmission distance [km] Multimode fiber (50 μm or 62.5 μm diameter): 2 km Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 63: Esfp-Fe-Lx-Sm1310

    Transmitter Optical Characteristics Center wavelength [nm] 1310 nm Maximum Tx optical power [dBm] -8 dBm Minimum Tx optical power [dBm] -15 dBm Minimum extinction ratio [dB] 8.2 dB Receiver Optical Characteristics Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 64: 1Gbps Sfp Copper Modules

    Transmitter Optical Characteristics Center wavelength [nm] Maximum Tx optical power [dBm] Minimum Tx optical power [dBm] Minimum extinction ratio [dB] Receiver Optical Characteristics Rx sensitivity (AVG) [dBm] Overload power (AVG) [dBm] Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 65: 1Gbps Esfp Optical Modules

    Minimum extinction ratio [dB] 8.2 dB Receiver Optical Characteristics Rx sensitivity (AVG) [dBm] -21 dBm Overload power (AVG) [dBm] 0 dBm 2.5.4.2 S-SFP-GE-LH40-SM1310 Table 2-62 S-SFP-GE-LH40-SM1310 specifications Item Value Basic Information Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 66: S-Sfp-Ge-Lh40-Sm1550

    Overload power (AVG) [dBm] -3 dBm 2.5.4.3 S-SFP-GE-LH40-SM1550 Table 2-63 S-SFP-GE-LH40-SM1550 specifications Item Value Basic Information Module name S-SFP-GE-LH40-SM1550 Part Number 02317347 Model S-SFP-GE-LH40-SM1550 Form factor eSFP Application standard 1000BASE-LX Connector type Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 67: S-Sfp-Ge-Lh80-Sm1550

    1000BASE-ZX Connector type Optical fiber type Working case temperature [°C(°F)] 0°C to 70°C Transmission rate [bit/s] 1.25Gbit/s Target transmission distance [km] 80 km Transmitter Optical Characteristics Center wavelength [nm] 1550 nm Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 68: Sfp-Ge-Lx-Sm1310

    Maximum Tx optical power [dBm] -3 dBm Minimum Tx optical power [dBm] -9 dBm Minimum extinction ratio [dB] 9 dB Receiver Optical Characteristics Rx operating wavelength range [nm] Rx sensitivity (AVG) [dBm] -20 dBm Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 69: Sfp-Ge-Lx-Sm1310-Bidi

    Maximum Tx optical power [dBm] -3 dBm Minimum Tx optical power [dBm] -9 dBm Minimum extinction ratio [dB] 6 dB Receiver Optical Characteristics Rx sensitivity (AVG) [dBm] -19.5 dBm Overload power (AVG) [dBm] -3 dBm Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 70: Sfp-Ge-Lx-Sm1490-Bidi

    Receiver Optical Characteristics Rx sensitivity (AVG) [dBm] -19.5 dBm Overload power (AVG) [dBm] -3 dBm 2.5.4.8 eSFP-GE-SX-MM850 Table 2-68 eSFP-GE-SX-MM850 specifications Item Value Basic Information Module name eSFP-GE-SX-MM850 Part Number 02315204 Model eSFP-GE-SX-MM850 Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 71: Esfp-Ge-Zx100-Sm1550

    Minimum extinction ratio [dB] 9 dB Receiver Optical Characteristics Rx sensitivity (AVG) [dBm] -17 dBm Overload power (AVG) [dBm] 0 dBm 2.5.4.9 eSFP-GE-ZX100-SM1550 Table 2-69 eSFP-GE-ZX100-SM1550 specifications Item Value Basic Information Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 72: 10Gbps Sfp+ Optical Modules

    Overload power (AVG) [dBm] -9 dBm 2.5.5 10Gbps SFP+ Optical Modules 2.5.5.1 OMXD30000 Table 2-70 OMXD30000 specifications Item Value Basic Information Module name OMXD30000 Part Number 02318169 Model OMXD30000 Form factor SFP+ Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 73: Osx010000

    Basic Information Module name OSX010000 Part Number 02318170 Model OSX010000 Form factor SFP+ Application standard 10GBASE-LR Connector type Optical fiber type Working case temperature [°C(°F)] 0°C to 70°C Transmission rate [bit/s] 10Gbit/s Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 74: Osx040N01

    Target transmission distance [km] 40 km Transmitter Optical Characteristics Center wavelength [nm] 1550 nm Maximum Tx optical power [dBm] 4 dBm Minimum Tx optical power [dBm] -4.7 dBm Minimum extinction ratio [dB] 3 dB Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 75: Sfp-10G-Bxd1

    Maximum Tx optical power [dBm] 0.5 dBm Minimum Tx optical power [dBm] -8.2 dBm Minimum extinction ratio [dB] 3.5 dB Receiver Optical Characteristics Rx sensitivity (AVG) [dBm] -14.4 dBm Overload power (AVG) [dBm] 0.5 dBm Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 76: Sfp-10G-Bxu1

    Receiver Optical Characteristics Rx sensitivity (AVG) [dBm] -14.4 dBm Overload power (AVG) [dBm] 0.5 dBm 2.5.5.6 SFP-10G-USR Table 2-75 SFP-10G-USR specifications Item Value Basic Information Module name SFP-10G-USR Part Number 02310MNW Model SFP-10G-USR Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 77: Sfp-10G-Zr

    Basic Information Module name SFP-10G-ZR Part Number 02310SNN Model SFP-10G-ZR Form factor SFP+ Application standard 10Gbase-ZR Connector type Optical fiber type Working case temperature [°C(°F)] 0°C to 70°C Transmission rate [bit/s] 9.95Gbit/s-10.31Gbit/s Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 78: Cables

    A PGND cable has two OT terminals and a copper cable with yellow/green plastic encapsulation. Figure 2-28 shows the appearance of a type of PGND cables. NO TE The figure is for reference only. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 79: Technical Specifications

    1417001 1417002 0.4 m Cable,0.4 7: OT6-4 3: OT6-6 m,4mm^ 2,OT6-4, 227IEC02 -4^2G&Y, OT6-6 Power 0415274 OT2-16-8 OT16-6 30 mm Cable,4m 8-001 ,OT2-16- 8,H07Z- K-16^2G &Y,OT16- 6,LSZH 2.6.2 AC Power Cable Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 80: Ac Power Cable

    BOM. Figure 2-30 Appearance of the North American-standard AC power cable Table 2-78 lists the connectors of AC power cables. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 81 AC female Power Cable 125V12A,3. 0m,PBSM, HVCTF-1.2 5mm^2(3C ),C13SF,Bla Power 04040888 CC13AU30 PI straight Cords male straight Cable,Austr female alia AC Power Cable,250V 10A,3.0m,P ISM,H05VV F-1.0mm^ 2(3C),C13S F,Black Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 82 AC Power female Cable,250V 10A,3.0m,P FSM, (H05VVF 1.0^2(3C)), C13SF,250V ,10A,BLack Power 04041104 CPACH030 PI straight Cords male straight Cable,Chin female a AC Power 250V10A,3. 0m,PISM,2 27IEC53-1. 0^2(3C),C1 3SF,Black Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 83 AC Power female Cable 250V10A,3. 0m,PLSM,H 05VV- F-1.0mm^ 2(3C),C13S F,Black Power 04042697 C3X1CHN0 PI straight 10 m Cords male straight Cable,Chin female a AC Power 250V10A,1 0.0m,PISM, 227IEC53-1 .0^2(3C),C 13SF,Black Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 84 Power male female Cable, Power Cable 250V2.5A,2 m,2X0.75m m^2,Black, PASM,227I EC53-0.75^ 2(2C)- I,C7SF Power 04044216 C0C7EU20 PC straight C7 straight cord,Europ male female e AC Power 250V2,2.0 m,PCSM, (H03VVH2 F-0.5^2(2C )),C7SF,Bla Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 85 Britain AC Power Cable 250V2.5A,2 .0m,PGAM, H05VVH2- F-0.75mm^ 2(2C),C7SF, Black Power 04044577 C0C7AU20 PI-I C7 straight Cords straight female Cable,Austr male alia AC Power 250V2.5A,2 .0m,PISM- I,H03VVH2 F-0.75^2(2 C),C7SF,Bla Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 86 Cable,Arge female ntina AC Power 250V10A,3. 0m,PISM,H 05VV- F-1.0mm^ 2(3C),C13S F,Black Power 04050139 CC13CN30 PI straight Cords male straight Cable,Chin female a AC Power Cable,250V 10A,3m,PIS M,227IEC5 3-1.0^2(3C ),C13SF,Bla Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 87 AC Power female Cable 250V10A,5. 0m,PISM,2 27IEC53(R VV)1.0mm ^2(3C),C13 SF,Black Power 04050517 CPC13SF00 PI straight Cable,Chin male straight a AC Power female Cable 250V10A,2. 0m,PISM,2 27IEC53(R VV)1.0mm ^2(3C),C13 SF,Black Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 88 Cable,Chin female a AC Power,250 V10A,1.5m, PISM,227IE C53(RVV)1. 0mm^2(3C ),C13SF,250 V,10A,Black Power Cord 04050956 C0C7BR200 PC-III C7 straight Cable,Brazil straight female AC Power male Cable,250V 2.5A,2m,PC IIISM,H05V VH2-F 2*0.75^2(2 C),C7SF,25 0V,2.5A,Bla Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 89 PD-I angle C7 straight cord,BS546 male female 250V2.5A,2 m,PD- IAM,H03VV F-0.75mm^ 2(2C),C7SF, 250V,2.5A, Black Power 04051997 IRAM2063 C7 straight cord,2m,IR straight female AM2063 male Straight Male,H05V VH2-F 2*0.75^2(2 C),C7 Straight Female,250 V,2.5A,BLA Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 90 AC 125V7A,2.0 m,PASM,VC TFK2*0.75 mm2(2C),C 7SF,125V,7 A,Black,BS Power 04052181 C7 straight cord,AC straight female Power male Cable 250V2.5A,2 .0m,C14SM ,H05VVH2- F-0.75mm^ 2(2C),C7SF, 250V,2.5A, Black,Non- standard AC power cable Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 91 Cords male female Cable,Sout h Africa AC Power 250V2.5A,2 m,PDAM,H 03VVH2- F-0.75^2(2 C),C7SF Power 0405G028 CC13KO30 PF straight Cords male straight Cable,Kore female a AC Power 250V10A,3 m,PFSM,H0 5VV-F 3*1.0^2(3C ),C13SF,Bla Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 92 AC Power 250V10A,1. 8m,C14SM, H05VV- F-1.0^2(3C ),C13SF,PD U Cable Power 0405G02H IDS2PWRC 1.8 m Cords BL07 straight straight Cable,Kore male female a AC Power 250V10A,1. 8m,C14SM, H05VV- F-1.0^2(3C ),C13SF,PD U Cable Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 93: Console Cable

    ● The cable with the C13 straight female X2 connector and C14 straight male X1 connector applies to non-desktop models in PDU installation scenarios. 2.6.3 Console Cable 2.6.3.1 Console Cable Connection A console cable is connected as follows: Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 94: Appearance And Structure

    Table 2-80 Pin assignments of a console cable Signal Description RJ45 Pin ID Signal DB9 Pin ID Direction RTS (Request to ← Send) DTR (Data Terminal ← Ready) TXD (Transmit Data) → Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 95: Technical Specifications

    Wire 2.6.4 Ethernet Cable 2.6.4.1 Ethernet Cable Connection The Ethernet cable, also called the network cable, is used for carrying signals on Gigabit networks or networks with a lower packet rate. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 96 Computers (including servers and workstations) with a switch or hub ● Crossover cable The crossover cable uses wiring scheme EIA/TIA T568A for one end and EIA/TIA T568B for the other, as shown in Figure 2-33. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 97 Network cables are classified into shielded and unshielded ones based on whether the twisted pair and RJ45 connector are shielded, as shown in Figure 2-34 Figure 2-35. Figure 2-34 Appearance of a shielded cable Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 98 Pin Assignments The twisted pair network cable has eight wires. The connection between wires and RJ45 connector pins complies with wiring scheme EIA/TIA 568A or EIA/TIA 568B, as shown in Figure 2-37. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 99 ● b. The wire of a twisted pair connects to the RJ45 connector pin. The color of the plastic jacket is considered as the name of the wire. Technical Specifications Table 2-82 lists the technical specifications of the Ethernet cable. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 100: Optical Fiber

    Select optical modules and fibers based on peer device interfaces. NO TICE You are advised to use Huawei optical modules. Optical modules from other vendors may cause incompatibility issues and lead to faults on the USG6000E. When using optical modules and optical fibers, pay attention to the following to ensure proper communication between devices: ●...
  • Page 101 2-40. Optical fibers are not delivered with the USG6000E. Purchase optical fibers separately as required. Figure 2-38 Appearance of the LC/PC-LC/PC single-mode optical fiber Figure 2-39 Appearance of the LC/PC-LC/PC multi-mode optical fiber Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 102 – To remove the optical fiber, squeeze the pinch on the fiber connector, gently push on the fiber connector, and then pull it out. ● SC/PC connector Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 103 To remove an optical fiber, rotate the outer screw jacket counter- clockwise on the optical interface until the screw loosens. Then gently pull out the optical fiber. ● MPO/PC optical fiber connector Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 104 X1 or X2 length radius Patch 1413009 SS-OP-D- SC/PC SC/PC 30 mm Cord,SC/ SC-S-5 PC,SC/ PC,Single mode,5m ,G.652D,3 Patch 1413019 SS-OP- LC/PC SC/PC 30 mm Cord,LC/ LC-SC- PC,SC/ PC,Single mode,5m ,G.652D,2 Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 105 Patch 1413022 SS-OP- LC/PC FC/PC 10 m 30 mm Cord,LC/ LC-FC- PC,FC/ M-10 PC,Multi- mode,10 m,A1b,2 Patch 1413022 SS-OP-D- LC/PC LC/PC 10 m 30 mm Cord,LC/ LC-M-10 PC,LC/ PC,Multi- mode,10 m,A1B,2 Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 106 SS-OP- LC/PC SC/PC 30 m 30 mm Cord,LC/ LC-SC- PC,SC/ M-30 PC,Multi- mode,30 m,A1b,2 Patch 1413027 SS-OP- LC/PC SC/PC 30 m 30 mm Cord,LC/ LC-SC- PC,SC/ S-30 PC,Single mode,30 m,G.652 D,2mm Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 107 SS-OP- LC/PC SC/PC 50 m 30 mm Cord,LC/ LC-SC- PC,SC/ M-50 PC,Multi- mode,50 m,A1b,2 Patch 1413031 SS-OP- LC/PC SC/PC 50 m 30 mm Cord,LC/ LC-SC- PC,SC/ S-50 PC,Single mode,50 m,G.652 D,2mm Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 108 Hardware Guide 2 Hardware Overview Descripti Part Model Connect Connect Cable Bend Number or X1 or X2 length radius Patch 1413036 SS-OP-D- LC/PC LC/PC 30 mm Cord,LC/ LC-S-6 PC,LC/ PC,Single mode,6m ,G.652D,2 Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 109: Hardware Installation

    3.1 Installation Procedure This section describes the installation procedure of the USG6000E. procedure and precaution for unpacking and checking the products before installation has started. Figure 3-1 shows the USG devices installation procedure. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 110: Installation Preparation

    Safety and Regulatory Compliance Information . Safety Precautions To ensure your own personal safety and to help protect your device from damage, observe the safety warnings on device labels and in the operation manual. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 111: Installation Environment Check

    All safety precautions in the operation manual only supplement local safety regulations. Basic Installation Requirements Requirements for Huawei installation and maintenance personnel before they can perform related operations are as follows: ● Only qualified and trained engineers can install, operate, and maintain Huawei equipment.

  • Page 112: Instruments Required For The Installation

    ● Marker: used to indicate specific lengths with drawn instruments lines. Fastening tools ● Flat-head screwdriver: used to fasten small screws and bolts. ● Phillips screwdriver: used to fasten small screws and bolts. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 113 ● Ground resistance tester: used to measure the ground resistance. ● Configuration terminal (A common PC is also applicable). Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 114: Installing A Desktop Device

    Step 1 Install mounting ears on the chassis. Use a Phillips screwdriver to fix the mounting ears to both sides of the chassis with M4 screws, as shown in Figure 3-2. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 115 Figure 3-3 Positions of floating nuts Use M6 screws to fix the floating nuts at the positions specified in Figure 3-3, as shown in Figure 3-4. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 116 Use a Phillips screwdriver to install M6 screws and fix the USG into the cabinet through mounting ears, as shown in Figure 3-5. Figure 3-5 Mounting the USG in a cabinet Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 117: Follow-Up Procedure

    Install foot pads at the bottom of the USG to ensure smooth contact between the USG and the workbench and avoid friction between the surface of the USG and the workbench. Step 2 Place the USG on the workbench. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 118: Mounting A Device Against A Wall

    There are no heavy objects on the USG. 3.3.1.3 Mounting a Device Against a Wall When no cabinet is available, you can mount the USG6000E-S03 on a wall. The customer must have expansion screws for wall-mounting. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 119: Tools And Accessories

    ● The wall must be a bearing wall. Otherwise, the wall is not suitable for wall-mounting. ● Ensure that the height of mounting holes is proper so that the indicators are easy to view. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 120 Use a φ8 drill bit to drill holes in the marked positions. Insert expansion bolts into the holes and screw the nuts to fasten the expansion bolts. Remove the nut, flat washer, and spring washer. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 121 NO TE The USG supports upward mounting and downward mounting. To prevent water from entering into ports and causing device damage, you are advised to mount the USG with ports facing downward. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 122: Connecting A Pgnd Cable

    Connecting the PGND cable of a USG6000E-S03 correctly is a key measure of surge protection and resistance to interference. Before using the USG6000E-S03, correctly connect the PGND cable. Otherwise, the USG may be damaged. Precautions The USG has been installed inside a cabinet. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 123 The ground cable of the USG6000E-S03 must be routed upwards. Step 3 Connect the M6 end of the PGND cable to the ground terminal of the cabinet, workbench, or wall. The tightening torque of the M6 screw is 4.8 N·m. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 124: Installing A Micro Sd Card

    Micro SD cards are optional and are not delivered with the device. If required, purchase the micro SD card (part number: 06010308) from Huawei. The micro SD card model is SDSDQAE-064G, the capacity is 64 GB, and dimensions (H x W x D) are 1 mm x 15 mm x 11 mm (0.04 in.
  • Page 125 When you hear a click, the micro SD card is in position. Hook the locating hook on the anti-theft board to the locating hole of the rear panel and tighten the captive screw on the anti-theft board. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 126: Connecting A Console Cable

    USG6000E-S03. Precautions Before connecting a console cable, perform the following operations: ● Check preparations. A PC is ready, a USG has been installed, and the ports to be connected are planned. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 127 ----End Follow-up Procedure After the cable connection is complete, verify that: ● The labels at both ends of a cable are correct, clear, neat, and facing the same direction. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 128: Connecting An Ethernet Cable

    Step 2 Connect one end of an Ethernet cable to the Ethernet port of the USG and the other end to the Ethernet port of the peer device based on the network plan. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 129: Installing Optical Transceivers And Connecting Optical Fibers

    (single-mode or multi-mode), optical fiber connector type (LC/PC, SC/PC, FC/PC, or MPO/PC-MPO/PC), and transmission rate. If different optical modules are used at the two ends, the communication may fail. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 130 Hardware Guide 3 Hardware Installation NO TICE Huawei optical modules are recommended. The optical modules from other vendors may cause faults on the USG due to incompatibility. CA UTION Do not look into the optical interface of the optical module or the optical fiber connector without eye protection.
  • Page 131 The RX and TX optical ports are inserted reversely. Pull out the optical fibers, change their position, and re-insert them. ● The optical module is damaged or the optical fiber is broken. Replace the optical module or the optical fiber. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 132: Connecting A Power Adapter

    Plug the other end of the AC power cable to the AC power socket or the output of the AC power supply device. NO TE The USG does not have any power switch. The power supply switch determines the power-on and power-off of the USG. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 133: Powering On Or Off The Usg6000E-S03

    The power cable and PGND cable are properly connected. ● The power switch in the equipment room is easy to locate so that you can power off devices in the case of accidents. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 134: Installing A 420 Mm Deep Device

    For details, refer to the Configuration Guide. 3.4 Installing a 420 mm Deep Device This chapter provides the cabinet-mounting, workbench-mounting, and cable connection methods of the USG6000E-S13 series. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 135: Mounting A Device To A Specified Location

    Mounting Bars and Cabinet Type Expandable rear mounting ears (BOM number: 21240492) ● Distance between the front and rear mounting bars: 310 mm to 538 ● Cabinet depth: 600 mm to 800 Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 136 In the front view, the air flow of the USG is front to rear. If the USG and a device whose air flow is rear to front must be mounted in the same cabinet, maintain certain spacing between them to prevent hot air recirculation. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 137 USG's port side to the interior side of the cabinet door. ● After the installation is complete, the rear mounting brackets and rear mounting bracket guide rails will not block cables routed from the ports or touch the cabinet door. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 138 Installation of Front Mounting Brackets, Rear Front and Rear Mounting Brackets, and Rear Mounting Bracket Mounting Rails Guide Rails 310 mm to 351 mm 369 mm to 410 mm 438 mm to 479 mm Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 139 638 mm to 696 mm 697 mm to 835 mm Step 2 Install floating nuts and cabinet guide rails. Determine the positions for installing the guide rails and floating nuts, as shown in Figure 3-19. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 140 Fix expandable rear mounting ears and adjustable guide rails (at the positions marked in Figure 3-19) to the left and right of the cabinet with M6 screws, as shown in Figure 3-21. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 141 Use M6 screws to fix the mounting ears of the USG to the mounting rack, as shown in Figure 3-22. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 142: Mounting A Device On A Workbench

    Stop unpacking if the USG is rusted or soggy. Then, investigate causes and contact the supplier. The workbench must be: ● Reliably grounded. ● Clean, firm, and securely installed. Accessories Four rubber feet Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 143 USG and the workbench. Step 2 Place the USG on the workbench. Figure 3-23 Placing the USG with rubber feet on a workbench ----End Follow-up Procedure Verify the following after the installation: Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 144: Connecting A Pgnd Cable

    Figure 3-24 Installing the OT terminal Step 3 Connect the M6 end of the PGND cable to the ground terminal of the cabinet, workbench, or wall. The tightening torque of the M6 screw is 4.8 N·m. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 145 USG6000E-S Series Hardware Guide 3 Hardware Installation Figure 3-25 Connecting a PGND cable NO TE In the dual-OT scenario, connect the ground terminal on the side panel of the USG. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 146: Installing A Hard Disk

    The electrical resistance between the ground terminal and ground point is less than 0.1 ohm on a multimeter. 3.4.3 Installing a Hard Disk This section describes how to install a hard disk units for the first time to avoid hard disk damage. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 147 3 Hardware Installation Precautions Precautions for the use of hard disks ● Use Huawei hard disks. The system cannot recognize the hard disks provided by other vendors. ● Wear an ESD wrist strap to protect the USG and hard disks from electrostatic damage.

  • Page 148: Connecting A Console Cable

    Step 2 Connect the RJ45 connector of the console cable to the console port (RJ45) of the USG. Step 3 Connect the DB9 connector of the console cable to the COM port of the management PC. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 149: Connecting An Ethernet Cable

    ● Label the cable. The cable must be labeled before being connected to the devices. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 150 Step 4 Remove the temporary labels and attach labels (2 cm away from the connectors) at both ends of the Ethernet cable. ----End Follow-up Procedure Verify the following after the installation: Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 151: Installing Optical Transceivers And Connecting Optical Fibers

    MPO/PC-MPO/PC), and transmission rate. If different optical modules are used at the two ends, the communication may fail. NO TICE Huawei optical modules are recommended. The optical modules from other vendors may cause faults on the USG due to incompatibility. CA UTION Do not look into the optical interface of the optical module or the optical fiber connector without eye protection.
  • Page 152 Ensure that the TX and RX ports on one end of the optical fiber cable are connected to the RX and TX ports (respectively) on the other end. Figure 3-30 Installing optical transceivers and connecting optical fibers Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 153: Connecting Ac Power Cables

    Bundle the AC power cable using a cable-retention clip and adjust the cable- retention clip to fasten the AC power cable. Plug the other end of the power cable to the AC power socket or the output of the AC power supply device. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 154: Powering On Or Off The Usg6000E-S13

    The power cable and PGND cable are properly connected. ● The power switch in the equipment room is easy to locate so that you can power off devices in the case of accidents. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 155 After powering off the USG, set it aside properly according to storage requirements. ----End Follow-up Procedure After the USG is powered on, you can log in to the configuration page for management and maintenance. For details, refer to the Configuration Guide. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 156: Maintaining The Hardware

    This section describes how to replace the hard disk as well as the precautions. Precautions Precautions for using the hard disks ● Use hard disks purchased from Huawei. Otherwise, the system may not identify them. ● Powering off the USG interrupts services. Install or replace the hard disks during off-peak hours.
  • Page 157 Use the handler to pull the hard disk out of the slot. Put the replaced hard disk into an ESD bag. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 158: Replacing A Power Module

    When two power modules are installed on the USG, one of them is hot swappable. Pay attention to the following items during hot swapping: ● Power off the power module to be replaced. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 159: Replacing The Power Module

    After the latch on the power module is tightened, pull the power module gently to check whether it can be removed. Connect the power cable to the socket on the new power module. For details, see . Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 160: Replacing A Fan Module

    Context NO TE The fan module of the USG is hot swappable. Therefore, when the fan module is faulty, you can replace the fan module without powering the USG off. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 161 Figure 4-3 Replacing the fan module Step 4 Check the FAN STATUS indicator on the panel. If the indicator is blinking green every two seconds (0.5 Hz), the new fan module works properly. ----End Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 162: Replacing A Micro Sd Card (Usg6000E-S03)

    Micro SD cards are optional and are not delivered with the device. If required, purchase the micro SD card (part number: 06010308) from Huawei. The micro SD card model is SDSDQAE-064G, the capacity is 64 GB, and dimensions (H x W x D) are 1 mm x 15 mm x 11 mm (0.04 in.
  • Page 163 When you hear a click, the micro SD card is in position. Hook the locating hook on the anti-theft board to the locating hole of the rear panel and tighten the captive screw on the anti-theft board. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 164: Replacing A Device

    4.5 Replacing a Device Context When a fault occurs on the USG device, such as a memory fault, CPLD fault, or startup failure, you can replace the USG device to rectify the fault. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 165: Preparing Tools

    Use a Phillips screwdriver to loosen the M6 screws on the mounting ears at both ends of the USG device. Hold the USG device with both hands. Place the removed USG device in an ESD bag or on an ESD pad. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 166 After replacing the device, pack up all the tools. If the old USG device is faulty, fill in the Repair Transmission Sheet and send the faulty device with the Repair Transmission Sheet to the equipment supplier or the specified repair service provider. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 167: A Appendix

    Table A-1 AC power cables for the power adapters directly connected to the socket Part Description Image 0404 External Power Cable, Power 3491 Cable 250V2.5A,2m,2X0.75mm^2,Bla ck,PASM,227IEC53-0.75^2(2C) -I,C7SF 0404 Power cord,Europe AC Power 4216 250V2,2.0m,PCSM, (H03VVH2F-0.5^2(2C)),C7SF,B lack Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 168 0404 Power Cable,America AC 4497 Power Cable 125V7A,2.0m,PASM,18NISPT- 1(2C),C7SF,Black 0404 Power Cords Cable,India AC 5094 Power 250V2.5A,2.0m,PC- IISM,IS 694-0.75^2(2C),C7S,250V,2.5A, Black 0405 Power Cord Cable,Brazil AC 0956 Power Cable,250V2.5A,2m,PC- IIISM,H05VVH2-F 2*0.75^2(2C),C7SF,250V,2.5A,B lack Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 169 A Appendix Part Description Image 0405 Power cord,BS546 1081 250V2.5A,2m,PD- IAM,H03VVH2- F-0.75mm^2(2C),C7SF,250V,2. 5A,Black 0405 Power cord,2m,IRAM2063 1997 Straight Male,H05VVH2-F 2*0.75^2(2C),C7 Straight Female,250V,2.5A,BLACK 0405 Power Cords Cable,South G025 Africa AC Power 250V2.5A,2m,PDAM,H03VVH2 -F-0.75^2(2C),C7SF Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 170 Part Description Image 0402 Power Cable,America AC 0728 Power Cable,125V10A,3.0m,PBSM,18 SJT(3C),C13SF,Black 0404 Power Cable,Japan AC Power 0887 Cable 125V12A,3.0m,PBSM,HVCTF-1. 25mm^2(3C),C13SF,Black 0404 Power Cords Cable,Australia 0888 AC Power Cable,250V 10A,3.0m,PISM,H05VV- F-1.0mm^2(3C),C13SF,Black Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 171 A Appendix Part Description Image 0404 Power cord,BS546 0889 250V10A,3.0m,PM- IAM,H05VV- F-1.5mm^2(3C),C13SF,250V,10 A,Black 0404 Power Cable,Britain AC Power 0890 Cable 250V10A,3.0m,PGAM ,H05VV- F-1.0mm^2(3C),C13SF,Black 0404 Power cord,Europe AC Power 1056 Cable,250V10A,3.0m,PFSM, (H05VVF 1.0^2(3C)),C13SF,250V,10A,BL Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 172 Part Description Image 0404 Power Cable,Britain AC Power 1117 Cable 250V10A,3.0m,PGAM ,H05VV- F-1.0mm^2(3C),C13AF-L,Black 0404 Power Cable,Italy AC Power 1120 Cable 250V10A,3.0m,PLSM,H05VV- F-1.0mm^2(3C),C13SF,Black 0404 Power Cords Cable,China AC 2697 Power 250V10A,10.0m,PISM,227IEC5 3-1.0^2(3C),C13SF,Black Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 173 AC Power 250V10A,3.0m,PISM,H05VV- F-1.0mm^2(3C),C13SF,Black 0405 Power Cords Cable,China AC 0139 Power Cable,250V10A,3m,PISM,227IE C53-1.0^2(3C),C13SF,Black 0405 Power Cable,China AC Power 0206 Cable 250V10A,1.0m,PISM,227IEC53( RVV)1.0mm^2(3C),C13SF,Blac 0405 Power Cable,China AC Power 0517 Cable 250V10A,2.0m,PISM,227IEC53( RVV)1.0mm^2(3C),C13SF,Blac Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 174 Part Description Image 0405 Power Cords Cable,China AC 0955 Power,250V10A,1.5m,PISM,227 IEC53(RVV)1.0mm^2(3C),C13S F,250V,10A,Black 0405 Power cord,India AC Power 1035 250V6A,3m,PM-IIAM,IS 694-1.0^2(3C),C13 SF,250V,6A,Black 0405 Power cord,South Africa AC 1080 Power 250V10A,3m,PMAM,H05VV- F-1.0mm^2(3C),C13SF,250V,10 A,Black Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 175 USG6000E-S Series Hardware Guide A Appendix Part Description Image 0405 Power Cords Cable,Korea AC G028 Power 250V10A,3m,PFSM,H05VV-F 3*1.0^2(3C),C13SF,Black 0405 Power Cords Cable,Denmark G02K AC Power 250V10A,3m,PKSM,H05VV- F-3*1.0^2(3C),C13SF,Black Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 176 0405 Power Cords Cable,China AC 0188 Power 250V10A,1.5m,C14SM,227IEC5 3(RVV)1.0mm^2(3C),C13SF,PD U Cable 0405 Power cord,China AC Power 0846 Cable,250V10A,3.0m,C14SM, (227IEC53-1.0^2(3C)),C13SF,2 50V,10A,Black,PDU Cable 0405 Power cord,China AC Power 0847 Cable,250V10A,6.0m,C14SM, (227IEC53-1.0^2(3C)),C13SF,2 50V,10A,Black,PDU Cable Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 177 0405 Power Cords Cable,Europe AC G019 250V10A,1.8m,C14SM,H05VV- F- 3*1.00^2,C13SF,PDU Cable 0405 Power Cords Cable,North G029 America AC Power 250V10A,1.8m,C14SM,SJT 18AWG(3C),C13SF,PDU Cable 0405 Power Cords Cable,Japan AC G02D Power 250V12A,1.8m,C14SM,HVCTF 1.25^2(3C),C13SF,PDU Cable Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 178: Requirements For Installation Environment

    150 mm away from other devices. ● Ensure that the ventilation and heat dissipation system is available at the position where the device is to be installed. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 179: Humidity, Temperature, And Cleanness

    2.4 x 10 1.3 x 10 density (number of dust particles per cubic meter) Noxio us gas densit Average (mg/m Maximum (mg/m Humidit Temp Long-term y and eratur operating tempera temperatu ture Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 180: Esd Requirements

    Adjust the humidity to reduce the impact of static electricity. ● Install an ESD floor in the equipment room. ● Wear an antistatic suit, ESD gloves, and antistatic shoes before entering the equipment room. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 181 Place temporarily demounted boards and components on the anti-static pad or other effective antistatic materials. Do not use non-ESD materials, such as foam, plastic bags, and paper bags to wrap or make contact with the boards. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 182: Lightning Protection And Grounding

    The enclosure of the transformer, AC zero wire of the low-voltage side of the transformer, and the metal outer protector of the power cable connected to the transformer enclosure must be connected to the nearest grounding post. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 183 Do not install switches or fuses on the ground cables. Ground cables should be as short and straight as possible and should not be coiled. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 184: Power Supply

    The low-voltage AC power supply system should use 3-phase 5-wire or 1-phase 3-wire for power supply. Table A-7 lists the low-voltage AC nominal voltage and frequency. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 185 Use voltage regulating or stabilization facilities to restrict the voltage fluctuation within a reasonable scale if: – The communications devices are powered by mains, and the voltage exceeds the rated voltage by +5% to -10% or the allowed voltage range. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.
  • Page 186 85% and 110% of the rated voltage, the load current varies between 5% and 100% of the rated current, and the output voltage of the rectifier is any fixed value in the -46.0 V to -56.4 V range. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 187: Electromagnetic Protection

    Common impedance (including the PGND system) coupling To reduce as much interference as possible, complete the following steps: ● Take effective measures to avoid possible power grid interference to the power supply system. Issue 01 (2023-11-21) Copyright © Huawei Technologies Co., Ltd.

  • Page 188: Fault Tag

    1. If the above returned BOM Code has the function of saving data, please delete the data saved in this BOM Code before returning to Huawei or removing the storage medium, like HD or CF Card. □ Yes □ No 2.
  • Page 189 Note: 1. Items marked with asterisks (*) are mandatory. 2. Data Removal Notice: Removal/Deletion of Data prior to handing over products to Huawei for repair, replacement or other purposes is at customer's sole discretion. Huawei usually sends products to local, Hungary or China service centers and for data removal (hereafter "Send- Delete Operations").

Table of Contents