Menu Commands - Honeywell 4800dr - Document Camera Imaging Manual

Example #3: What is the device's current setting for Imaging Style?
Enter: snpsty?.
Response: SNPSTY2[ACK]
This response indicates that the device's Imaging Style (SNPSTY) is set to 2, or Manual.

Menu Commands

The following chart lists the settings for each of the serial default commands. The factory default setting
is indicated by an asterisk (*).
Setting
Selection
* Indicates default
Imaging Default Commands
Default all Imaging Commands
Image Snap
Imaging Style - Decoding
(IMGSNP)
*Imaging Style - Photo
Imaging Style - Manual
Beeper On
*Beeper Off
Aimer Lines On
*Aimer Lines Off
Exposure (1-7874 microseconds)
*Gain - None
Gain - Medium
Gain - Heavy
Gain - Maximum
Delta for Acceptance (0-255) *25
*LED State - Off
LED State - On
*Wait for Trigger Off
Wait for Trigger On
Update Tries (0-10) *6
Target White Value (0-255) *125
Target Set Point Percentage (1-99) *97
Image Ship *Infinity Filter - Off
(IMGSHP)
Infinity Filter - On
*Compensation Off
Compensation On
*Pixel Depth - 8 bits/pixel (grayscale)
Pixel Depth - 1 bit/pixel (B&W)
*Don't Sharpen Edges
Sharpen Edges (0-23)
*File Format - JPEG
File Format - KIM
File Format - TIFF binary
File Format - TIFF binary group 4, compressed
File Format - TIFF grayscale
Serial Command
For full description,
# Indicates a
see page
numeric entry
IMGDFT 1-1
SNPSTY0 1-2
SNPSTY1 1-2
SNPSTY2 1-2
SNPBEP1 1-2
SNPBEP0 1-2
SNPAIM1 1-3
SNPAIM0 1-3
SNPEXP 1-3
SNPGAN1 1-4
SNPGAN2 1-4
SNPGAN4 1-4
SNPGAN8 1-4
SNPDEL### 1-4
SNPLED0 1-2
SNPLED1 1-2
SNPTRG0 1-2
SNPTRG1 1-2
SNPTRY## 1-4
SNPWHT### 1-4
SNPPCT## 1-5
IMGINF0 1-6
IMGINF1 1-6
IMGCOR0 1-7
IMGCOR1 1-7
IMGBPP8 1-7
IMGBPP1 1-7
IMGEDG0 1-7
IMGEDG## 1-7
IMGFMT6 1-8
IMGFMT0 1-8
IMGFMT1 1-8
IMGFMT2 1-8
IMGFMT3 1-8
2 - 3