Imgsnp Modifiers; P - Imaging Style; B - Beeper; T - Wait For Trigger - Honeywell 4800dr - Document Camera Imaging Manual

IMGSNP Modifiers

P - Imaging Style

This sets the Image Snap style.
0P Decoding Style. This processing allows a few frames to be taken until the exposure
parameters are met. The last frame is then available for further use.
1P Photo Style (default). This mimics a simple digital camera, and results in a visually
optimized image.
2P Manual Style. This is an advanced style that should only be used by an experienced user.
It allows you the most freedom to set up the document reader, and has no auto-exposure.

B - Beeper

Causes a beep to sound after an image is snapped.
0B No beep (default)
1B Sounds a beep when the image is captured.

T - Wait for Trigger

Waits for a hardware button push before taking the image. This is only available when using Photo
Style (1P).
0T Takes image immediately (default)
1T Waits for a button push, then takes the image

L - LED State

Determines if the LEDs should be on or off, and when. Ambient illumination (0L) is preferred for taking
pictures of color documents, such as ID cards, especially when the document reader is in a stand.
LED illumination (1L) is preferred when the document reader is hand held. LED State is not available
when using Decoding Style (0P).
LEDs off (default)
0L
1L LEDs on
1 - 2