A - Aimer Lines; E - Exposure - Honeywell 4800dr - Document Camera Imaging Manual

A - Aimer Lines

Sets whether the aimer lines will be captured with the image or not. In order to capture the aimer lines,
the LEDs must also be off. If the LEDs are on, the aimer lines will not be captured.
0A Aimer Lines off (default)
1A Aimer Lines on
Example of Aimer Lines Off (0A):

E - Exposure

Exposure is used in Manual Style only (2P), and allows you to set the exposure time. This is similar
to setting a shutter speed on a camera. The exposure time determines how long the imager takes to
record an image. On a bright day, exposure times can be very short because plenty of light is
available to help record an image. At nighttime, exposure time can increase dramatically due to the
near absence of light. Units are 127 microseconds. (Default = 7874)
n E Range: 1 - 7874
Example of Exposure at 7874E with
fluorescent lighting:
Example of Aimer Lines On (1A) with LEDs
off (0L):
Example of Exposure at 100E with
fluorescent lighting:
1 - 3