Safety instructions Please read this manual carefully and observe all listed notes. This will ensure reliable op- eration and long life expectancy of your product. Keep these instructions with your prod- uct at all times. In the event that you transfer ownership of this product, please provide these instructions to the new owner.
The hard drive must not be subjected to drops of water or spray. Do not place any containers filled with liquid (vases or similar objects) onto or close to the hard drive. The container could tip over and liquid can impair electrical safety. ...
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gene- rates, uses, and can radiate radio frequency energy that may cause harmful interference to radio communications, if not installed and used in accordance with the instructions.
Power supply Do not open the power adapter housing. There will be a danger of electric shock when the housing is open. It contains no user- serviceable parts. The power socket must be in the vicinity of the device and within reach of the power adapter cables.
Cleaning It will not be necessary to clean the equipment as a rule. Always detach the plug and all connection cables before cleaning. Do not use any solvents, corrosive or gaseous cleaning products. Caution! This equipment does not include any parts that need servicing or cleaning. Repairs ...
What’s in the box? Please check to ensure that the below mentioned parts are in the box and inform us if anything is missing. External hard disk USB connection cable Power supply unit (Ktec, KSAD1200150W1UK) User guide System requirements ...
You will be able to use the hard drive directly through the data haven, without a cable connection, if you own a MEDION PC equipped with the data haven 3. Data havens of the older generation are not compatible. A direct connection, without a USB cable, will not be possible for this reason.
Installing the hard disk Note Your drive has already been set up in the factory (1 partition in the FAT32 for- mat). It will not be necessary to reformat or repartition it. Caution! Partitioning or formatting a disk drive deletes data. We assume no responsibili- ty for lost data.
Formatting the drive In order to remove data from the hard disk, the partitions must be formatted. Caution! You must be totally certain about the drive letter to enter, so that you do not format a drive that contains data you wish to keep. You can carry out the formatting using Windows®...
Customer service First aid in the case of malfunctions Localization of the cause Malfunctions can sometimes have simple causes, but they can also at times be very com- plex in nature and require a costly analysis. Requirements for optimal performance: ...
Please contact our helpline if the troubleshooting suggestions in the previous section have not solved your problem. We will try to help you over the telephone. However, before you contact your nearest MEDION Technology Centre, please have the following information available: ...
Page 14
Medion Electronic Ltd. 120 Faraday Park, Faraday Road, Dorcan Swindon SN3 5JF, Wiltshire United Kingdom Hotline UK: 0871 37 61 020 (Costs 7p/min from a BT landline, mobile costs may be higher) Fax: 01793 71 57 16 To contact us by email please visit the "Service and Support"...
Need help?
Do you have a question about the MD 90167 and is the answer not in the manual?
Questions and answers