User Manual USB Flash Drive MD 86167 P89035
Included with your USB Flash Drive
Please check that the contents listed below are supplied with your package. Your package should include the following components:
8 GB USB Flash Drive
System Requirements
Slot: USB port (USB 1.1/2.0) • Operating system: Microsoft Windows
Safety Instructions
Please read this chapter carefully and observe all listed notes. This ensures a reliable operation and long life expectancy of your USB Flash
Drive. Keep these instructions with your device at all times. In the event that you transfer ownership of this device, please provide these
instructions to the new owner. Please contact our Service Centre if you are experiencing technical problems with your device.
Data Security
Note: Every time you update your data make back-up copies on an external storage medium. The supplier does not as-
sume liability for data loss or damage to data storage units, and no claims can be accepted for damages resulting from
the loss of data or consequential losses.
Operational Safety
Follow the operating instructions of your computer.
Keep the device away from humidity and avoid vibration, dust, heat, and direct sunlight, in order to prevent operational
interference.
Never open the case. This would void all warranty claims and it could possibly cause the destruction of the unit.
Do not allow children to play with electrical devices without supervision. Children do not always recognize possible
dangers.
Before operating the device after a transport, allow it to become acclimatized. High temperature and humidity deviations can lead
through condensation to moisture build up, which can cause an electrical short. Fasten down the plug cover before transportation.
Electromagnetic Compatibility
While connecting the device, the guidelines for electromagnetic compatibility must be followed. Keep at least 1 meter distance
from high frequency and magnetic sources of interference (TV, loudspeakers, mobile phones, etc.), to avoid operation
disruption and data loss.
Cleaning Instructions
Normally cleaning of this device is unnecessary.
Attention! This device does not contain parts that must be serviced or cleaned.
Make sure the USB Flash Drive does not become contaminated. Do not use solvents, corrosives, or spray cleansers.
If necessary, clean the casing with a moist cloth.
Recycling
Device
At the end of its life, the appliance must not be disposed of in household trash. Enquire about the options for
environmentally-friendly disposal
Packaging
To avoid damage during transport, the device is stored in packaging. Packaging is produced mostly from
materials which can be disposed of in an environmentally friendly manner and be professionally recycled.
Contact your local authority waste department for further information.
Getting Started
Connecting
Remove the protective cover of the USB Flash Drive and connect the device with an available USB port.
The USB Flash Drive will be recognized and the operating system assigns the letter of an empty drive. Now you can use the device like
a diskette drive (copy data, delete, etc.).
Removing USB Flash Drive
With some operating systems it may be necessary to sign off
the device. The installed USB Flash Drive is displayed in the taskbar:
Right click with the mouse "Unplug or Eject Hardware" and choose the appropriate
entry. The instruction for device removal will follow:
11/2009
• Documentation
®
XP/Vista®/ Windows®7
Safely remove USB mass storage device – drive
1
Need help?
Do you have a question about the MD 86167 and is the answer not in the manual?
Questions and answers