SurfPrep E2A Series Instruction Manual

Please read, understand and follow all safety information contained in these instructions prior to the use of this tool. Retain these instructions
for future reference.
This electric tool is intended for use in industrial locations, and used only by skilled, trained professionals in accordance with the instructions in
this manual. This electric tool is designed to be used with a disc pad and appropriate abrasive for sanding metals, wood, stone, plastics and
other materials. It should only be used for such sanding applications and within marked capacity and ratings. Only accessories specifi cally
recommended by SurfPrep should be used with this tool. Use in any other manner or with other accessories could lead to unsafe operating
conditions.
Do not operate tool in water or in an excessively wet application.
Do not use disc pads that have a Max RPM or Max OPM less than the tool Max RPM or Max OPM rating. Never use disc pads that have a
weight and/or size different from what the tool was specifi cally designed for.
WARNING :
CAUTION :
Summary of Device and Carton Labels containing Safety Information
CAUTION :
GEN 2+ ELECTRIC RANDOM ORBITAL SANDER INSTRUCTION
MANUAL 127 mm (5 in.) and 152 mm (6 in.)
4,000/min – 10,000/min (RPM)
INPUT : 100 - 130 Va.c. 50 - 60 Hz. 150 W
Important Safety Information
Intended Use
Explanation of Signal Word Consequences
Indicates a potentially hazardous situation which, if not avoided, may result in death or serious injury
and/or property damage.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury
and/or property damage.
For safe operation, see instruction manual
Recycle: Do not dispose in household waste
Wear eye protection
Wear hearing protection
Wear respiratory protection
Read operator instructions before using
American Wire Gauge
United Coarse Thread
Federal Communications Commission
1
Original Instructions
B-E2A5060U-SP-8
Revision 2024/01/25