Oppo BDP-93 Operating Instructions

BJ Unlimited Blu-ray Upgrades.
Supports:
- Blu-ray zones: A, B, C
DVD regions: 1, 2, 3, 4, 5, 6
-
Blu-ray zones
OPERATING INSTRUCTIONS
Switching Blu-ray Zones:
Switching Zones is done using the remote control.
Make sure the player is on and there is no disc in the player
Press DIMMER – DIMMER – DIMMER - MUTE
Select Blu-ray zone as followed: 
- Zone A: Press 1 on the remote control
- Zone B: Press 2 on the remote control
- Zone C: Press 3 on the remote control
Restart the player (turn it off and then back on)
Switching DVD Regions:
Switching Regions is done using the remote control.
Make sure the player is on and there is no disc in the player
Press DIMMER – DIMMER – DIMMER – PURE AUDIO
Select DVD Region as followed: 
- Region 1: Press 1 on the remote control
- Region 2: Press 2 on the remote control
- Region 3: Press 3 on the remote control
- Region 4: Press 4 on the remote control
- Region 5: Press 5 on the remote control
- Region 6: Press 6 on the remote control
- Automatic: Press 0 on the remote control
Restart the player (turn it off and then back on)
NOTE: Zone/Region switching must be done within 20 seconds.
Resume Playback Error:
Resume playback of a disc can generate a zone or region error message if the disc
was first loaded in a none corresponding zone or region. Since the player
'remembers' where it stopped playing the last time, it will automatically resume
playing from that point. Which will be the zone mismatch error part on the disc.
Solution:
First make sure the correct zone or region is selected.
Press the STOP button when the resume playback message shows on screen. This
has to be done within 5 seconds (before the message goes off screen) .
OPPO BDP-93/95
Operation Manual
JVB Digital
DVD regions