Subscribe to Our Youtube Channel
Related Manuals for Beko WADX8436A-IT
Summary of Contents for Beko WADX8436A-IT
- Page 1 Washing Machine User Manual WADX8436A-IT Document Number : 2820529408_EN/ 13-04-21.(8:35)
-
Page 2: General Safety Instructions
General safety instructions This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. 1.1 Life and property safety Never place the product on a carpet-covered floor. Otherwise, lack of airflow beneath the machine will cause electrical parts to overheat. -
Page 3: Electrical Safety
should not play with the product. Cleaning and maintenance works should not be performed by children unless they are supervised by someone. Children under the age of 3 should be kept away unless continuously supervised. Packaging materials are dangerous for the children. Keep packaging materials in a safe place away from reach of the children. -
Page 4: Important Instructions For Environment
Important instructions for environment 2.1 Compliance with WEEE Directive This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. -
Page 5: Technical Specifications
Technical specifications Supplier name or trademark Beko WADX8436A-IT Model name 7149345000 Rated capacity (kg) Maximum spin speed (rpm) 1400 Built-in Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet • / - • Available Electrical input (V/Hz) -
Page 6: Appropriate Installation Location
4.1 Installation • Apply to the nearest authorised service agent for the installation of your product. • Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility. • Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures. -
Page 7: Connecting Water Supply
4.1.4 Connecting water supply It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher. CAUTION: Models with a single water inlet should not be connected to the hot water tap. -
Page 8: Adjusting The Feet
4.1.6 Adjusting the feet CAUTION: In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing and vibration problems. -
Page 9: Preparing Laundry For Washing
4.2 Preparation 4.2.1 Sorting the laundry • Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature. • Always obey the instructions given on the garment tags. 4.2.2 Preparing laundry for washing • Laundry items with metal attachments such as, underwiring, belt buckles or metal buttons will damage the product. -
Page 10: Using Detergent And Softener
4.2.6 Using detergent and softener When using detergent, softener, starch, fabric dye, bleach and descaling agents to be added through the detergent container 2, read the manufacturer's instructions written on the package and follow the dosages specified. Use a measuring cup, if any. For programmes where liquid detergent dosing is selected, do not add any powder detergent. - Page 11 Adding Liquid Detergent and Softener • Pull the detergent drawer towards yourself to open it. • To add liquid detergent (left) and softener (right), open the lid of the relevant container upwards as shown in the image. • When adding liquid detergent or softener, do not exceed the tip of the «Max»...
- Page 12 • The machine will measure the load, and determine the detergent amount depending on the load amount and selected functions. During the washing operation, the detergent intake is not visible, it will be taken in directly with the water. • If it is requested to use powder detergent in programmes where detergent dosing system activates required amount of powder detergent should be added to the detergent compartment.
-
Page 13: Tips For Efficient Washing
4.2.7 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woolens/Silks (Recommended (Recommended (Recommended temperature (Recommended temperature range temperature range temperature range range based on soiling level: based on soiling level: 40-90 based on soiling level: based on soiling level: cold -40 cold -40... -
Page 14: Operating The Product
4.3 Operating the product 4.3.1 Control panel 1 - Programme selection knob 7 - End Time Adjustment Button 2 - Temperature level lights 8 - Auxiliary function button 3 3 - Spin level indicator lights 9 - Auxiliary function button 2 4 - Display 10 - Auxiliary function button 1 5 - Start/Pause Button... -
Page 15: Programme And Consumption Table
4.3.3 Programme and consumption table Auxiliary functions Selectable Programme temperature range °C Cold - 90 2,40 1400 • • • • • Cotone Cold - 90 1,80 1400 • • • • • Cold - 90 0,97 1400 • • •... -
Page 16: Programme Selection
The auxiliary functions in the table may vary according to the model of your machine. Water and power consumption may vary subject to the changes in water pressure, water hardness and water temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in the mains voltage. When selecting a programme, you can see the washing duration on the display of your machine. - Page 17 4.3.5 Programmes • Eco 40-60 The Eco 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle, and that this programme is used to assess the compliance with the EU ecodesign legislation.
- Page 18 • Curtain You can use this programme to wash your tulles and curtains. As their meshed texture causes excessive foaming, put little amount of detergent into the main wash compartment. Thanks to the special spin profile of the programme, tulles and curtains crease less. Do not overload the machine to avoid damage to curtains. It is recommended to use special detergents produced for curtains in the powder detergent compartment in this programme.
-
Page 19: Temperature Selection
Below you can find the soil groups that can be selected with the “Quick Wash” setting button: When "Quick Wash" is When the "Quick Wash" When the "Quick Wash" not selected button is pressed once button is pressed twice Sweat Blood Collar Soil Chocolate... -
Page 20: Spin Speed Selection
Press the Temperature Adjustment button to change the temperature. Temperature will decrease gradually. No change can be made in programmes where temperature adjustment is not allowed. You can also change the temperature after the washing cycle has started. This can be done if the washing steps allow it. -
Page 21: Auxiliary Function Selection
4.3.8 Auxiliary function selection Select the desired auxiliary functions before starting the programme. When a programme is selected, symbols of the auxiliary functions selected with it will turn on. If you press the key for an auxiliary function that cannot be selected with the current programme, you will hear a warning from the washing machine. -
Page 22: To Enable Bluetooth
• Auto Dosing Setting This function can only be used with the HomeWhiz application. With this function, the dosing amounts of the Liquid Detergent and Softener are changed. For all programmes, dosing will be performed based on the latest settings you have selected until you select a new setting. 4.3.8.2 Functions/Programmes Selected by Pressing the Function Keys for Three Seconds •... -
Page 23: Time Display
To disable Bluetooth: Press and hold the Remote Control function button for 3 seconds. You will see the countdown “3-2-1” and the Bluetooth symbol will turn off. You must complete the first setup of the HomeWhiz app for Bluetooth to be enabled. After the setup, if you press the Remote Control function button while the button is in the Programme Download/Remote Control position, the Bluetooth connection will be enabled automatically. -
Page 24: Loading Door Lock
4 The programme follow-up lights on the display show the current programme step. 4.3.11 Loading door lock There is a locking system on the loading door of the machine that prevents opening of the loading door in cases when the water level is unsuitable. When the door is locked, “Door Locked”... -
Page 25: Switching The Machine To Pause Mode
4.3.12 Changing the selections after programme has started Adding laundry after the programme has started When you press the Start / Pause button, if the level of water inside the machine is suitable (if add laundry icon is on), the door lock will be disabled and the door will open so that you can add laundry. When the door lock is disabled, the door lock symbol on the display will disappear. -
Page 26: End Of Programme
4.3.14 End of programme Once the programme is completed, the End symbol will be displayed. If you do not press any button for 10 minutes, the machine will switch to OFF mode. Display and all indicators are turned off. Completed programme steps will be displayed if you press any button. 4.3.15 HomeWhiz and Remote Control Functions. - Page 27 • Follow on-screen instructions until the HomeWhiz app asks you about the product you wish to connect to your smart device. • Return to the HomeWhiz app and wait until the setup is complete. Once the setup is complete, give your washing machine a name and confirm.
- Page 28 You can check the function indicator on the button to follow whether the Remote Control function is On or Off. If the Remote Control function is Off, all the operations are handled on the washing machine and only status follow-up is allowed on the application. If the Remote Control function cannot be enabled, you will hear a warning after pressing the button.
-
Page 29: Maintenance And Cleaning
4.4 Maintenance and cleaning Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals. 4.4.1 Cleaning the detergent drawer When to clean • If you see hardened, viscous detergent or softener when you open the dosing container lid, •... -
Page 30: Cleaning The Loading Door And The Drum
• Use a flat screwdriver to remove the tabs holding the upper cover of the detergent drawer (there are 6 tabs in total: two on the right side of the drawer, two on the left and two at the back) and wash the inside of the drawer. -
Page 31: Draining Remaining Water And Cleaning The Pump Filter
Close the taps. Remove the nuts of the water intake hoses to access the filters on the water intake valves. Clean them with an appropriate brush. If the filters are too dirty, remove them from their places with a pliers and clean in this way. -
Page 32: Troubleshooting
Troubleshooting Problem Cause Solution Programs do not start after the Start / Pause / Cancel button is not pressed. • *Press Start / Pause / Cancel button. loading door is closed. It may be difficult to close the loading door in case of •... - Page 33 Problem Cause Solution Washing takes longer than Water pressure is low. • Product waits until taking in adequate amount specified in the user manual.(*) of water to prevent poor washing quality due to the decreased amount of water. Therefore, the washing time extends.
- Page 34 Problem Cause Solution Washing performance is poor: Insufficient amount of detergent is used. • Use the recommended amount of detergent Stains persist or the laundry is not appropriate for water hardness and the laundry. whitened. (**) Excessive laundry is loaded in. •...
- Page 35 Problem Cause Solution Detergent residue in the detergent Detergent was put in wet drawer. • Dry the detergent drawer before putting in drawer. (**) detergent. Detergent has gotten damp. • Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.
- Page 36 Repair and repair attempts by end-users for parts not included in such list and/or not following the instructions in the user manuals for self-repair or which are available in support.beko.com, might give raise to safety issues not attributable to Beko, and will void the warranty of the product.
Need help?
Do you have a question about the WADX8436A-IT and is the answer not in the manual?
Questions and answers