Nacon RIG 700 Series Manual

Also See for RIG 700 Series:

User manual (96 pages)

Table of Contents

Contents

1 Fit
2 Setup and basics
3 Support
4 Documents / Resources
- 4.1 References
- 4.2 Download manual

Nacon RIG 700 Series Manual

Fit

Your headset components easily snap into the headset frame to configure the best fit and sound.

The headband adjusts to three sizes (small, medium, large) by moving the earcups. To remove an earcup, press the earcup to detach it from the headband.
Fit
information NOTE Headband style may vary.

Setup and basics

Your adapter comes pre-paired to your headset. After you adjust and charge your headset and configure your adapter, power on your headset and it's ready to go.

Setup PS4
PS4

Connect your adapter to your system.
Power on your PS4 and Check for updates
To adjust system audio settings, check your console user guide.

PS4 (slim version)

Connect your adapter to your system.
Power on your PS4 and Check for updates
To adjust system audio settings, check your console user guide.

Setup Xbox One

Connect your adapter to your system.

NOTE Ensure the switch on the back of the adapter is set to your preference: console or PC.
Power on your Xbox One and Check for updates
To adjust system audio settings, check your console user guide.

Setup PC

Connect your adapter to your system.

Optical cable connection is only for RIG 700HD and RIG 700HS.

RIG 700HX only: Ensure the switch on the back of the adapter is set to «PC.»

Charge It takes 2 hours to fully charge the headset. The headset LED turns off once charging is complete.

Power on or off Press the Power button for 2 seconds until you hear "power on» or «power off.»

Adjust volume

To increase or decrease the game and chat volume, adjust the top headset dial.
To increase or decrease the master volume, adjust the bottom headset dial.

For the PS4 (slim version), set the top headset dial in the middle; game and chat remain balanced. Use the bottom headset dial to increase or decrease the master volume.

Mute Tap the Mute button to mute or unmute your headset.

Adjust mic monitoring Press and hold the Mute button to cycle through mic monitoring levels. Mic monitoring lets you hear your own voice in the headset.