PICTURE ADJUSTMENTS
Turn a separate front panel control to adjust picture contrast, picture brightness,
picture color density, and picture hue respectively:
CONTRAST (picture contrast)
CONTRAST
Softer
BRIGHT (picture brightness)
BRIGHT
Darker
CHROMA (picture color density)
CHROMA
Thinner
PHASE (picture hue)
PHASE
Purplish
Relation between picture adjustments and input video signals
Each picture adjustment is effective for the following video signal input:
Signal
Control
NTSC
PHASE
Yes
CHROMA
Yes
BRIGHT
Yes
CONTRAST
Yes
8
Clearer
Brighter
Denser
Greenish
Composite video, Y/C
PAL
NTSC 4.43
B/W
No
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
COMPONENT
RGB
No
No
No
Yes
Yes
Yes
Yes
Yes
NOTE
To adjust the CHROMA and PHASE
controls more precisely, input the
color bar signal and operate the
BLUE CHECK function as follows:
After inputting the color bar signal,
push the front panel BLUE CHECK
switch to display a monochrome
blue picture without red/green signal
components. Turn the CHROMA
and PHASE controls so that all
(four, in the example below) blue
bars have the same density and
brightness.