Summary of Contents for Fox Electronics GSM525S SMS RED
Page 1
GSM525S SMS RED 4 Input 2 Output Communicator ELECTRONICS (PTY) Installer Command Manual PLEASE MAKE SURE THAT THIS MANUAL IS FOR THE SOFTWARE VERSION OF THE COMMUNICATOR IN USE This manual will explain the command structure and all commands that are valid for the SMS communicator.
Page 2
This will return a list of the -ADMIN User numbers currently stored on the unit. Set Auto-Test Interval. Auto Test Interval hours # space -MASTER User .AT 24# [Hours] -ADMIN User Default = 0 hours(Test Disabled) (Max. = 250 hours) Fox Electronics (Pty) Ltd...
BIT5-Send “SIM Slot Change”? 1=Yes 0=No BIT6-Reserved 1=N/A 0=N/A BIT7-Reserved 1=N/A 0=N/A BIT8-Reserved 1=N/A 0=N/A If you do NOT wish to receive the messages as in the above table, set the individual bit to ‘0’ . Fox Electronics (Pty) Ltd...
Page 4
Set Address Text. space -MASTER User .ADR ‘123 Earth Street, This instruction updates the -ADMIN Use Text added into the SMS Milky Way, the Cosmos.’# when reporting events. Maximum characters = 40.Do not use * in text. Fox Electronics (Pty) Ltd...
Page 5
When a number is added as ADMIN, the user will also be able to execute programming commands. Adding Admin -MASTER User Cell No Settings Byte # space space Phone Numbers .AA +27802345678 10101010# -ADMIN User -With Settings. Fox Electronics (Pty) Ltd...
Page 6
.AS ‘*141#’ 01# cell network. .AS ‘*101#’ 20# CELL C .AIR -MASTER User AIR time remaining on .AIR This will return a message : active SIM card -ADMIN User Your remaining airtime R230.80 Fox Electronics (Pty) Ltd...
Page 7
Delete. Delete the Base -ADMIN User This command will Delete ALL the Base Station monitoring station numbers (all 4) from the unit, numbers from the unit. disabling monitoring to a Base station and (Monitoring Disabled) Monitoring software. Fox Electronics (Pty) Ltd...
Need help?
Do you have a question about the GSM525S SMS RED and is the answer not in the manual?
Questions and answers