MicRadar CDO-SYR60A0-03 User Manual

60g radar module

Advertisement

Quick Links

User Manual
Product Model:
CDO-SYR60A0-03(HX)
Product name:
60G Radar module
Product Description: 60G, 1T3R, Tracking

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CDO-SYR60A0-03 and is the answer not in the manual?

Questions and answers

Summary of Contents for MicRadar CDO-SYR60A0-03

  • Page 1 User Manual Product Model: CDO-SYR60A0-03(HX) Product name: 60G Radar module Product Description: 60G, 1T3R, Tracking...
  • Page 2: Table Of Contents

    Directory 1.Product introduction ......................... - 1 - 2.Scope of application ........................- 1 - 3.Main functions and performance parameters ................- 2 - 3.1 Electrical performance parameters ................- 2 - 3.2 Radar function and performance parameters..............- 2 - 3.3 Environmental suitability statement ................
  • Page 3: Product Introduction

    1.Product introduction This product is a high-sensitivity 60GHz millimeter-wave radar module, which mainly realizes the position detection of personnel targets in the radar coverage area. This radar module mainly has the following features: 1) Based on the FMCW radar system , realize the function of two-dimensional or three-dimensional area personnel perception;...
  • Page 4: Main Functions And Performance Parameters

    3.Main functions and performance parameters 3.1 Electrical performance parameters parameter minimum Typical maximum unit value value Power parameters Operating voltage (VCC) Working current (I Radar parameters Carrier frequency(f 61.5 Signal Bandwidth Transmit power (P 9.79 Radar system FMCW Scanning period Antenna parameters Antenna Gain (G Horizontal beam(FOV)
  • Page 5: Environmental Suitability Statement

    number Minimum resolution distance for multiple people Radar hot start time Radar cold start time Note: [1]- The radar is restarted or stopped for a short time; [2]- The radar is in shutdown mode for a long time. 3.3 Environmental suitability statement 1) Working temperature: -20℃~70℃...
  • Page 6: Software Interface Description

    the current detection area; L - No one is in the current detection area; [2]. RST - Radar reset control terminal. H-Normal working mode of radar;When H-level is converted to L-level and remains above 0.1ms, the radar resets. 4.2.Software interface description The radar uses UART interface for external communication.
  • Page 7: Pacts List

    5.Pacts list Description Dosage Supplier 0201 10nf ± 20% 16V 1.00 EYANG/VIIYONG/ FENGHUA/Samsung/ CCTC 0201 470nf ± 20% 10V 1.00 EYANG/VIIYONG/ FENGHUA/Samsung/ CCTC 0201 100nf ± 20% 16V 14.00 EYANG/VIIYONG/ FENGHUA/Samsung/ CCTC 0201 1uf ± 20% 6.3V 12.00 EYANG/VIIYONG/ FENGHUA/Samsung/ CCTC 0402 10uf ±...
  • Page 8: Dimensions And Product Photos

    6.Dimensions and product photos 1. Product dimensions 2. Product appearance diagram 7.Installation and use instructions This radar has the angle measurement function in two directions, horizontal and vertical. The horizontal installation method is shown in the figure below. This installation method is mainly for human detection in standing or sitting postures, such as living room, home appliance applications and other occasions.
  • Page 9 installed horizontally and forward, the installation inclination angle is ≤± 10 , and there are no obvious obstructions and coverings in front of the radar. The normal direction of the radar is aligned with the main detection position to ensure that the main beam of the radar antenna covers the detection area, and the radar beam covers the human activity airspace.
  • Page 10: Fccwarning

    8.FCCwarning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
  • Page 11 est susceptible d’en compromettre le fonctionnement. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Tous les changements ou modifications non expressément approuvée par le responsible de la conformité...

Table of Contents