Page 1
OPERATOR'S MANUAL Cat. No. M18 HSAL M18™ LED STAND LIGHT/CHARGER WARNING To reduce the risk of injury, user must read and understand operator's manual.
Page 3
• To reduce the risk of electric shock, do not put light ® • Charge only MILWAUKEE M18™ Lithium-Ion packs. in water or other liquid. Do not place or store appliance Other types of batteries may burst causing personal where it can fall or be pulled into a tub or sink.
Page 4
Do not recharge non-rechargeable batteries. Read operator’s manual. ADDITIONAL BATTERY SAFETY SPECIFICATIONS RULES Cat. No..........M18 HSAL AC Input Volts ........100-240Vac WARNING DC Input Volts............18V DC Output Volts ..........18V To reduce the risk of fire, personal injury, and AC Input Amps........1A at 110V...
Page 5
We recommend to always use a Residual Current FUNCTIONAL DESCRIPTION Device with a rated residual current of 30mA or Heads less. Extension poles The supply cord cannot be replaced. If the cord Extension latches is damaged the appliance should be Control panel scrapped.
Page 6
® Compared to NiCd battery pack types, MILWAUKEE than 100 Wh (Watt Hours can be found on the battery Lithium-Ion battery packs deliver fade-free power for pack nameplate). Generally, Li-Ion batteries rated their entire run time.
Page 7
Lithium-Ion Charging Status Remove the battery pack from the tool for charging Battery Pack Red Charger Charging Status ® when convenient for you and your job. MILWAUKEE Temperature Indicator Light batteries do not develop a "memory" when charged Too Hot Fast Flashing Not charging after only a partial discharge.
Page 8
SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty ® . Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...
Need help?
Do you have a question about the M18 HSAL and is the answer not in the manual?
Questions and answers