Party Link Stereo function .... 18 Changing Bluetooth® devices ..12 Cleaning and care ........19 PC sound card function (USB) .....12 Troubleshooting ........20 Operation ..........13 Resetting to factory settings .....20 Switching on and off ......13 Auto-off .........13 Technical data .........21 FENDER® x TEUFEL ROCKSTER® GO 2...
End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement. Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. FENDER® x TEUFEL ROCKSTER® GO 2...
Please refer to the proof of purchase teufel.de/support (enclosed with the loudspeaker), or the order confirmation that you received as a PDF document. Contact: us.teufelaudio.com/contact 2. Serial number teufelaudio.com/contact ► Refer to the rear of the loudspeaker. teufel.de/kontakt FENDER® x TEUFEL ROCKSTER® GO 2...
Additional information and tips. ► Keep the instructions in a safe place so that they can be passed on to third parties. ► When passing on the loudspeaker, also pass on the instructions. FENDER® x TEUFEL ROCKSTER® GO 2...
A charging adapter is not included in the delivery scope. ► Check the scope of supply for completeness. ► Check the scope of supply for damage. ► Keep the original packaging during the warranty period. FENDER® x TEUFEL ROCKSTER® GO 2...
Legend (actuation): 1.5 s = Press 1� = Hold pressed down (1.5 s) = Press 2� = Hold pressed down (8 s) HOLD = Hold pressed down (0.5 s) = Press and hold 0.5 s FENDER® x TEUFEL ROCKSTER® GO 2...
Page 9
0.5 s (6) | (11) → Deactivating the Party Link Stereo function – p. 18 0.5 s (7) | (11) → Activating the Party Link Stereo function – p. 18 0.5 s (9) | (10) → Resetting to factory settings – p. 20 1.5 s (6) | (9) → Power saving mode (Eco mode) – p. 16 * With button combinations, both buttons must be pressed simultaneously. FENDER® x TEUFEL ROCKSTER® GO 2...
The button (11) flashes blue once. ☑ the external player. The Bluetooth® list has been deleted. 2. Press and hold the button (11) for 1.5 seconds. The button (11) flashes blue. ☑ Bluetooth® pairing mode is activated. FENDER® x TEUFEL ROCKSTER® GO 2...
The button (11) flashes blue once. ☑ The active Bluetooth® device has changed again. 5. Start playback on the first external device. ☑ Media playback from the first external player is emitted through the loudspeaker. FENDER® x TEUFEL ROCKSTER® GO 2...
Press the button (7) again. ► Press the button (11). ☑ Playback continues/muting is The button (11) lights up canceled (depending on the source). continuously blue. ☑ Bluetooth® has been set as the playback source. FENDER® x TEUFEL ROCKSTER® GO 2...
The LED indicator (5) goes out. ☑ Dynamore® has been switched off. ► Press the button (6). ► To lower/increase the volume gradually (faster), press and hold button (6). ☑ The volume is lowered. FENDER® x TEUFEL ROCKSTER® GO 2...
Connect the USB-C cable (2) to a NOTE suitable power supply device. ☑ The battery is charging. To protect the battery, the loudspeaker has a deep discharge protection feature that switches off the device when the threshold is reached. FENDER® x TEUFEL ROCKSTER® GO 2...
☑ Deactivating power saving mode The charge level is displayed. ► Press and hold the button combination (6) | (9) again for 1.5 seconds. ☑ Power saving mode is deactivated. FENDER® x TEUFEL ROCKSTER® GO 2...
Party Link mode. 3. Switch on another loudspeaker (receiver). → Switching on and off – p. 13 4. Press and hold the button combination (8) | (11) on the unpaired loudspeaker for 0.5 s econds. FENDER® x TEUFEL ROCKSTER® GO 2...
4. Press and hold the button combination (7) | (11) on the second loudspeaker for 0.5 seconds . The button (11) on the first loudspeaker lights up continuously blue. The loudspeaker becomes channel L. FENDER® x TEUFEL ROCKSTER® GO 2...
2. Remove stubborn stains with a cloth slightly moistened with mild soapy water. 3. Then rub damp surfaces dry with a dry, soft cloth without applying pressure. ☑ The loudspeaker has been cleaned FENDER® x TEUFEL ROCKSTER® GO 2...
► Press and hold the button combination (9) | (10) for 8 seconds. ☑ The loudspeaker has been reset to the factory settings. All personal settings have been deleted. FENDER® x TEUFEL ROCKSTER® GO 2...
2400–2483.5 MHz 4.9 mW / 6.9 dBm Lautsprecher Teufel GmbH hereby declares that the FENDER® x TEUFEL ROCKSTER® GO 2 loudspeaker complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: teufel.de/konformitaetserklaerungen...
Page 22
Online support teufelaudio.be us.teufelaudio.com/support teufelaudio.fr teufelaudio.com/support teufelaudio.pl teufel.de/support teufelaudio.it teufelaudio.es Contact us.teufelaudio.com/contact teufelaudio.com/contact teufel.de/kontakt All information is provided without guarantee. Subject to technical changes. Typographical and other errors excepted. FENDER® x TEUFEL ROCKSTER® GO 2 UM US V1.2 PD...
Need help?
Do you have a question about the TEUFEL ROCKSTER GO 2 and is the answer not in the manual?
Questions and answers