JVC JY-VS200U - Professional Dv 1-ccd Camcorder Features Manual page 6

PLAYBACK
Advanced Features For Video
Power Switch
Lock Button
Recording Start/Stop Button
Display
SOUND M D O E – STEREO
12B I T M D O E – SOUND 1
SYNCH RO – O . O
REC M ODE – SP
COPY – OF F
S / AV I N UT P – OF F
RETUR N
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE Allows you to set the video recording mode (SP or LP) depending on your preference
(
It is recommended you use "REC MODE" in the "
camcorder as a recorder during dubbing (
COPY ON: Enables dubbing of images recorded on a tape to a memory card (
OFF: Enables snapshots to be taken during video playback.
S/AV INPUT ON: Enables audio/video signal input from the AV and S-VIDEO connectors (
OFF: Enables audio/video signal output to a TV, VCR, etc. via the AV and S-VIDEO
BEEP* Makes a beep or melody sound/activates the shutter sound effect.
TALLY* Turns on/off the tally lamp.
DEMO MODE* Starts automatic demonstration.
MIC IND.* Turns on/off the Microphone Level Indicator.
COLOR BAR* Makes color bars appear/disappear.
ON SCREEN* Makes the camcorder 's indications appear/disappear from the connected TV screen.
DATE/TIME* Makes the date/time appear/disappear on the camcorder .
TIME CODE* Makes the time code appear/disappear on the camcorder.
* Each setting is linked with "
( pg. 30, 31). The parameters are the same as in the description on pg. 30, 31.
JY-VS200U EN 36-65
Using Menus For Detailed Adjustment
The following procedure applies to all except Synchro
Comp (
1
2
3
4
MENU Wheel
5
6
Menu Screen
NOTES:
It is also possible to change the ON SCREEN settings by
pressing DISPLAY on the remote control (provided).
"REC MODE" can be set when the Power Switch is set to
"
When "S/AV INPUT" is set to "ON", camcorder
playback cannot be viewed on the AV output.
pg. 42.
pg. 42.
pg. 70.
pg. 15).
connectors ( pg. 54, 58).
DISPLAY" or " SYSTEM", which appears when the Power Switch is set to "
41
pg. 69, 70).
Set the Power Switch to "
the Lock Button located on the switch.
Press the MENU wheel. The Menu Screen appears.
Rotate the MENU wheel to select the desired function
menu, and press it. The selected function menu appears.
Rotate the MENU wheel to select the desired
function, and press it to display the Sub Menu.
Rotate the MENU wheel to select the desired
parameter and press it. Selection is complete.
Rotate the MENU wheel to select "1RETURN" and
press it twice to close the Menu Screen.
" or " " ( pg. 15, 29).
VIDEO" Menu when using this
pg. 58, 59).
01.3.12, 7:06 PM
41
EN
" while pressing down
pg. 60).
pg. 58).
"