Still Playback; Frame-By-Frame Playback - JVC JY-VS200U - Professional Dv 1-ccd Camcorder Features Manual

40
EN
Power Zoom Lever (VOLUME)
Power Switch
Lock Button
Fast-Forward Button (3)
Rewind Button (2)
Stop Button (5)
Play/Pause Button (4/6)

Still Playback:

Pauses during playback.
1) Press 4/6 during playback.
2) To resume normal playback, press 4/6 again.
If still playback continues for more than about 3 minutes, the camcorder 's Stop mode is automatically
engaged. After 5 minutes in the Stop mode, the camcorder 's power is automatically turned off.
When 4/6 is pressed, the image may not pause immediately while the camcorder stabilizes the still
image.
Shuttle Search:
Allows high-speed search in either direction.
1) Press 3 for forward or 2 for reverse search during playback.
2) To resume normal playback, press 4/6.
During playback, press and hold 2 or 3. The search continues as long as you hold the button.
Once you release it, normal playback resumes.
A slight mosaic effect appears on screen during Shuttle Sear ch. This is not a malfunction.

Frame-By-Frame Playback:

1) Engage Still Playback.
2) Rotate the MENU wheel towards "+" for forward Frame-By-Frame Playback, or towards " –" for reverse
Frame-By-Frame Playback during Still Playback.
To resume normal playback, press 4/6.
You can also use the provided remote control for Frame-By-Frame Playback (
Slow-Motion Playback, Playback Zoom and Playback Special Effects
Available only with the remote control (provided) (
JY-VS200U EN 36-65
PLAYBACK
1
Load a tape (
2
Set the Power Switch to "
the Lock Button located on the switch. To start
playback, press 4/6.
• To stop playback, press 5.
• Press 2 to rewind, or 3 to fast-forward the tape
during Stop mode.
To Control The Speaker Volume . . .
.... slide the Power Zoom Lever ( VOLUME) towards "+"
to turn up the volume, or towards " –" to turn down the
volume.
Speaker
NOTES:
If Stop mode continues for 5 minutes when power is
supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power Switch to
"OFF", then to "
The playback picture can be viewed in the LCD monitor ,
viewfinder or on a connected TV (
You can also view the playback picture on the LCD
monitor with it flipped over and pushed against the
camera body.
LCD monitor/viewfinder indications:
• When power is supplied from a battery: the "
battery pack remaining power indicator is displayed.
When power is supplied through the DC cord: "
does not appear.
• During Stop mode, none of the indications are
displayed.
When a cable is connected to the AV connector, the
sound is not heard from the speaker.
Allows frame-by-frame search.
pg. 63, 64).
40
Basic Playback For Video
pg. 12).
" while pressing down
".
pg. 54).
"
pg. 63).
01.3.12, 7:06 PM
"