Playback Special Effects - JVC JY-VS200U - Professional Dv 1-ccd Camcorder Features Manual

64
USING THE REMOTE CONTROL UNIT
EN
PLAYBACK EF FEC T
PLAYBACK EFFECT
Select Menu
OF F
1 CLASS I C F I LM
2 MONOTONE
3
SEP I A
4 STROBE
5 V I DEO ECHO
Remote sensor
EFFECT
JY-VS200U EN 36-65
FEATURE:
PURPOSE:
To allow you to add creative effects to the video
playback image.
OPERATION:
1) To start playback, press PLAY (4).
2) Point the remote control at the camcorder's remote
sensor and press EFFECT. The PLAYBACK EFFECT
Select Menu appears.
3) Move the highlight bar to the desired effect by
pressing EFFECT. The selected function is activated
and after 2 seconds the menu disappears.
To deactivate the selected effect, press EFFECT ON/
OFF on the remote control. Pressing it again re-
activates the selected effect.
To change the selected effect, repeat from step 2
above.
NOTES:
When some Playback Special Effects are used, the
Multi-Analyzer 4 and Multi-Analyzer 9 Snapshot
modes (
The effects that can be used during playback are
Classic Film, Monotone, Sepia, Strobe and V ideo
Echo. The effects work the same in playback as they
did in recording. Refer to page 37 for more
information.
PLAY
EFFECT ON/OFF
64

Playback Special Effects

pg. 20) are not available.
01.3.12, 7:07 PM
(cont.)