uFOTO does not turn on.
Check if the adapter is properly plugged.
Check if your uFOTO is fully charged.
The battery remaining indicator is incorrect
The phenomenon occurs when you are using your uFOTO in an
extremely hot or cold environment.
The displayed battery remaining differ from the current one. Fully
discharge and then recharge the built-in battery to correct the display.
The built-in battery is discharged. Plug the adaptor into your uFOTO for
I cannot launch the Sub-Display function
The USB cable is not well connected.
The ASUS uFOTO utility is not completely installed. Refer to page and
re-install the utility.
The Sub-Display function cannot work with the Mass Storage mode
simultaneously. Make sure that you are not in the Mass Storage mode
prior to launching the Sub-Display function.
I cannot import photos or MP3 files into uFOTO
The internal memory is full. Remove some files from your uFOTO.
The LCD brightness is not stable
Check if the AI Light function is enabled. If you enable this function,
the LCD backlight will auto-adjust according to the surrounding
Refer to the digital User manual that is in the support CD.
Go to the ASUS website (http://www.asus.com) for updated information.
Quick Start Guide