NS CL64B 8 ft. x 8 ft.
Instant Canopy
ATTENTION!
IMPORTANT: READ THIS INFORMATION BEFORE PROCEEDING!
To avoid damage to your frame, please read the enclosed instruction
carefully before setting up your canopy.
8 ft. x 8 ft. Instant Canopy
OPENING THE CANOPY FRAME
ATTACHING THE CANOPY
With two persons on the diagonal
Unfold the canopy (A) and place on
ends, lift and partially pull the
top of the canopy frame (B).
Secure the canopy (A) top to the
canopy frame (B) apart.
corners of the canopy frame (B)
using the Velcro connections.
B
A
B
ADJUSTING THE CANOPY HEIGHT
SECURING THE CANOPY IN PLACE
Press the red button on each leg and raise or lower to
Insert a stake (C) into the foot of each canopy leg.
Measure out each leg to a proper distance and secure
adjust the canopy height.
four stakes (C) to the ground. Attach the ropes to the canopy
top and tie the attached ropes to the stakes in the
ground. Ensure the ropes have the proper tension
by adjusting the plastic adjusters on the ropes.
ITEM # 1001580498
1001580499
Model # CL64B-B
CL64B-R
LOCKING THE FRAME
From under the canopy (A), place one hand
on the upper frame and use the other
hand to push the central hub (B) straight
up until it clicks into the central pole.
x4
B
C
Please contact 1-800-305-1726 for further assistance.
Need help?
Do you have a question about the CL64B and is the answer not in the manual?
Questions and answers