Everbilt NS HPP100 Use And Care Manual

PACKAGE CONTENTS
A - Large canopy x1 B - Small canopy

Setting Up the Canopy

1
OPENING THE CANOPY FRAME
□ With a person on each end, lift and partially pull the canopy
frame (C) apart.
C
3
ATTACHING THE LARGE CANOPY
□ Unfold the large canopy (A) and place on top of the canopy
frame (C). Ensure that you separate the large canopy (A)
from the small canopy (B).
□ Secure the large canopy (A) to the corners of the canopy
frame (C) using the Velcro connections.
B
5
ATTACHING THE SIDEWALL
□ Hook the top two corners of the side wall (F) onto the metal
loops on the canopy frame.
□ Connect the velcro loops around the frame to secure the side
wall (F) in place.
7
SECURING THE CANOPY IN PLACE
□ Insert a stake (D) into the foot of each canopy leg.
□ Measure out from the each leg to a proper distance and
secure four stakes (D) to the ground. Tie the pre-attached
ropes to the stakes (D) on the ground. Ensure the rope has
the proper tension by adjusting the plastic adjusters on the
ropes.
Use and Care Guide
NS HPP 100 10 ft. x 10 ft.
Commercial Instant Pop Up Tent
with Wall Panel
C - Canopy frame
x1 x1
A
A
F
D - Stake x8 E - Hex wrench
(for maintenance only) x1
2
ATTACHING THE SMALL CANOPY
□ Position the small canopy (B) on the center of the frame (C)
and hook the four corners of the small canopy (B) to the four
hooks on the center structure of the frame (C).
4
LOCKING THE CANOPY
□ From under the canopy, place one hand on the upper frame
and use the other hand to push the central hub straight up
until it clicks into the central pole. Finish attaching the large
canopy (A) inside the canopy frame using the Velcro loops.
C
6
ADJUSTING THE CANOPY HEIGHT
□ Press the red button on each leg and raise or lower to adjust
the canopy height.
Item #1002658070
Model #NS HPP100
F - Side wall x1 G - Wheeled storage
bag x1
B
C
D
Please contact 1-800-305-1726 for further assistance.
D
HOMEDEPOT.com