Advertisement
Quick Links
thermOweld
INSTRUCTIONS FOR THERMOWELD GROUNDING CONNECTIONS - CABLE TO STEEL OR CAST IRON
CS-99 FOR M-8007
Place run cable into mold then butt
tap cable against run cable as shown.
Note: Packing material may
be required for 1/0 and larger
cables to prevent leakage
between cable and steel
surface.
CS-99 FOR M-6793
Insert the two bottom cables to the center line of the
tap hole. Then insert the top cable to the
center of the tap hole. Packing material
may be required for 1/0 and larger cables
to prevent leakage between cable and
steel surface.
+1 (918) 627-5210 • 1-800-558-1373 • WWW.THERMOWELD.COM
ELECTRICAL GROUNDING • CATHODIC PROTECTION • ELECTRIC UTILITY • RAIL
®
The Contractors Choice
CS-99 FOR M-8278
Place run cable into mold then butt
tap cables against run cable as
shown. Note: Packing material may
be required for 1/0 and larger cables
to prevent leakage between cable
and steel surface.
Tel. +1.800.558.1373
Tel. +1.918.627.5210
www.thermoweld.com
ECN 2552 REV "E" 03/06/13
34-5381-67
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Burndy Continental Industries thermOweld CS-99 FOR M-8007
Summary of Contents for Burndy Continental Industries thermOweld CS-99 FOR M-8007
- Page 1 thermOweld ® The Contractors Choice INSTRUCTIONS FOR THERMOWELD GROUNDING CONNECTIONS - CABLE TO STEEL OR CAST IRON CS-99 FOR M-8007 CS-99 FOR M-8278 Place run cable into mold then butt Place run cable into mold then butt tap cable against run cable as shown. tap cables against run cable as Note: Packing material may shown.
- Page 2 GENERAL SAFETY INSTRUCTIONS DO NOT USE cast iron connections on soil pipe (ASTM A-74-82). 1. Always wear proper clothing, safety glasses and gloves when A test weld should be made on a section of the pipe being used to exothermic welding. determine the possibility of detrimental metallurgical effects.
Need help?
Do you have a question about the Continental Industries thermOweld CS-99 FOR M-8007 and is the answer not in the manual?
Questions and answers