Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sencor SWS CO2 PRO
Summary of Contents for Sencor SWS CO2 PRO
- Page 1 SWS CO2 PRO INTERNAL WIRELESS SENSOR CO CONCENTRATION VNITŘNÍ BEZDRÁTOVÉ ČIDLO KONCENTRACE CO VNÚTORNÝ BEZDRÔTOVÝ SNÍMAČ KONCENTRÁCIE CO BELTÉRI VEZETÉK NÉLKÜLI -KONCENTRÁCIÓ ÉRZÉKELŐ WEWNĘTRZNY BEZPRZEWODOWY CZUJNIK STĘŻENIA CO...
- Page 2 Thank you for purchasing the Wireless CO Air Quality Sensor. Please read the instructions carefully according to the version you purchased and keep the manual well for future reference. IMPORTANT NOTE Read and keep these instructions. Do not cover the ventilation holes with any items such as newspapers, curtains etc. Do not clean the unit with abrasive or corrosive materials.
-
Page 3: Battery Insertion
OVERVIEW USB INPUT DC 5V 500mA 1. LCD display 5. [ CH1 ~ 4 ] slide switch 2. [ MODE ] key 6. [ RESET ] key 3. [ CHECK ] key 7. Battery compartment 4. Wall mounting holder 8. USB DC power port BATTERY INSERTION 1. -
Page 4: Getting Started
GETTING STARTED 1. Slide [ CHANNEL ] key to set the channel number for your sensor(s). 2. Use a pin to press [ RESET ] key for run the channel number. Note: enable the measurement to displayed correctly on the console (purchase separately). LCD DISPLAY 1. -
Page 5: Measurement Interval
MEASUREMENT INTERVAL Powered by DC adapter The device measures CO concentration every minute automatically when powered with a DC adapter. Manual detection User can press [ CHECK ] key anytime to get an updated measurement of CO concentration readings. Operated by batteries When powered by batteries, it’s detecting every 10 minutes by default. -
Page 6: Battery Power Status
Note: This 6 level scale of CO concentration is not the same as Air Quality Index (AQI). BATTERY POWER STATUS The device is powered by rechargeable batteries, and comes with battery power indicator. The battery life of the device from fully charged batteries is determined by the number of detections it performed, either through set intervals or manually activated by user. - Page 7 1. Unscrew and remove the battery door of sensor with a screwdriver. 2. Pull the black ribbon lying under the batteries. All batteries can be removed together. 3. Insert new 3 × AA size rechargeable batteries into the battery compartment according to the polarity mark inside battery compartment.
-
Page 8: Data Transmission
VIEW DATA ON CONSOLE You can view the readings of your CO sensor(s) on the console receiver to which the sensor(s) is linked to. Readings can then be analyzed into averages of past 1 hour or 24 hours or maximums of past 1 hour, 24 hours, or since its last reset. -
Page 9: Specifications
Disposal in Countries Outside the European Union retailer. 2014/53/EU. For the full version of the EU Declaration of Conformity, please visit: www.sencor.cz Changes in the text, design and technical specifications may be made without prior notice and we reserve the right to make such changes. - Page 10 FAST ČR, a.s., U Sanitasu 1621, Říčany 251 01, Czech Republic info@sencor.com Authorized service centers: Visit www.sencor.com for detailed information about authorized service centers. The original version of the instructions is in the Czech language, other language versions are made by the appropriate translation.
Need help?
Do you have a question about the SWS CO2 PRO and is the answer not in the manual?
Questions and answers