Table of Contents
Related Manuals for Avantco 177EG16N
Summary of Contents for Avantco 177EG16N
- Page 1 User Manual 10/2024 177EG30N Electric Griddles Base Models: #177EG16N, #177EG24N, #177EG30N, #177EG36N, #177EG48N, #177EG60C, #177EG60E Note: Please read and keep these instructions. For indoor use only. www.AvantcoEquipment.com...
-
Page 2: Table Of Contents
User Manual Electric Griddles Table of Contents Hazards Statements ..........................3 Initial Setup .............................. 5 Cleaning ..............................6 Operation ..............................6 Maintenance ............................7 4010483 4010483 Conforms to UL STD. 197 Conforms to NSF/ANSI STD. 4 www.AvantcoEquipment.com... -
Page 3: Hazards Statements
User Manual Electric Griddles Hazard Statements General Safety Hardwired Units: A licensed and insured food service technician or electrician must install these units. If unit is not properly installed, void of warranty and damage may occur. • Read the Manual: Thoroughly read and understand the manual before setting up, operating, or cleaning the griddle. -
Page 4: Operational Safety
User Manual Electric Griddles Operational Safety • Overheat Control: Monitor the griddle to prevent overheating, especially during extended use. Ensure adequate ventilation to maintain safe operation. • Sharp Elements: Keep hands away from the hot sealing element located on the edge of the machine’s cover to prevent burns and injuries. -
Page 5: Initial Setup
User Manual Electric Griddles Initial Setup Inspect the Packaging: Examine the griddle’s packaging for any signs of damage that may have occurred during shipping. If damage has occurred, please reach out to manufacturer immediately. Unboxing: Open the packaging with care. Use scissors or a box cutter to cut open the box, ensuring you do not damage the griddle or its components. -
Page 6: Cleaning
User Manual Electric Griddles Cleaning First-Time Cleaning Instructions 1. Remove Protective Covering: Remove the wax paper from the griddle plate. 2. Preheat Griddle: Preheat the griddle to liquefy the protective food-safe oil applied during shipment. 3. Clean Surface: Wipe off the melted oil with a clean cloth and rinse using a mixture of ¼ cup vinegar and 1 quart of water. -
Page 7: Maintenance
User Manual Electric Griddles Maintenance Regular Cleaning Daily Wipe Purpose: To prevent the buildup of food particles, grime, and bacteria, which could affect the quality of the food and the machine's overall performance. Turn off the machine and disconnect it from the power source. 2. -
Page 8: Troubleshooting
User Manual Electric Griddles Troubleshooting PROBLEM POSSIBLE CAUSES SOLUTIONS Heat is set too high. Turn heat down. Fat appears to smoke Moisture in the food may excessively. This is normal. No solution necessary. be turning into steam. Heat is set too high. Turn heat down.
Need help?
Do you have a question about the 177EG16N and is the answer not in the manual?
Questions and answers