Connection To A Personal Computer - JVC DF450 - Camcorder - 680 KP Instructions Manual

NOTES:
If no image is displayed on the LCD monitor, set
"S/AV INPUT" to "OFF". (
Digital Dubbing is performed in the sound mode
recorded on the original tape, regardless of the
current "SOUND MODE" setting. (

Connection To A Personal Computer

[A] Using USB cable*
To USB
USB cable
(provided)*
To USB
connector
PC with DV connector
PC
* GR-DF470/450 only
pg. 36, 41)
pg. 37)
[B] Using DV cable
OR
To DV IN/OUT
Core filter
DV cable
(optional)
Core filter
To DV connector
When connecting the camcorder to a PC
using a DV cable, make sure to follow the
procedure below. Connecting the cable
incorrectly may cause malfunctions to the
camcorder and/or the PC.
Connect the DV cable first to the PC, and then
to the camcorder.
Connect the DV cable (plugs) correctly
according to the shape of the DV connector.
[A] Using USB cable (GR-DF470/450 only)
It is possible to do the following things:
Transfer still images stored on a memory card
to a PC.
Transfer still/moving images recorded on a
tape to a PC. (GR-DF470 only)
[B] Using DV cable
It is also possible to transfer still/moving images
on a tape to a PC with a DV connector by using
the provided software (GR-DF470 only),
software equipped with the PC or commercially
available software.
If you are using a Windows
®
Windows Messenger to conduct video
conferences over the Internet, using a
camcorder. For details, refer to the help for the
®
Windows Messenger.
NOTES:
Refer to "SOFTWARE INSTALLATION AND PC
CONNECTION GUIDE" for the bundled software
and drivers.*
It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
( pg. 15)
Never connect the USB cable and the DV
cable simultaneously to the camcorder.
Connect only the cable you wish to use to the
camcorder.*
When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U DV
cable depending on the type of DV connector
(4 or 6 pins) on the PC.
If the PC connected to the camcorder via the USB
cable is not powered, the camcorder does not
enter the USB mode.*
The date/time information cannot be captured into
the PC.
Refer to the instruction manuals of the PC and
Software.
The still images can also be transferred to a PC
with a DV connector-equipped capture board.
EDITING
53
EN
®
XP, you can use
CONTINUED ON NEXT PAGE