Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PowerPac PPFS30
Summary of Contents for PowerPac PPFS30
- Page 1 16” ELECTRIC STAND FAN Model: PPFS30 1 9 0 3 8 5 - 2 4...
-
Page 2: Parts & Description
PARTS & DESCRIPTION LIST OF COMPONENTS Grill Ring with Grill Ring Clips Front Grill Blade Cap Fan Blade Guard Mounting Nut Back Grill Motor Shaft Joint Main Body Main Body screw Extension Pole Height Adjustment Ring Outer Pole with “L-shape” screw Base Cover Base Swing Button... - Page 3 WARNINGS ATTENTION : Read this booklet carefully as it contains important instructions for a safe installation, use and maintenance. Important instructions to be kept for future reference. The following basic precautions should always be followed when using electrical appliances: Read all instructions before using the appliance. The Appliance This appliance must be used only for the purpose it was expressly designed;...
- Page 4 Avoid placing the power cable on abrasive or sharp surfaces or in positions where it can be damaged easily. The cable must NOT be placed under carpets, or covered with throw rugs, runners or similar. Arrange the cable away from the high traffic area, and where it will NOT be tripped over.
- Page 5 Switch the appliance off and unplug the power cable of the appliance if it is NOT used for a long period, before storing, assembling & disassembling, cleaning or performing any maintenance operation. Before storing, cleaning or performing any maintenance operation, leave to cool for at least 30 minutes.
-
Page 6: How To Assemble
HOW TO ASSEMBLE Warning: DO NOT operate the fan with any of its parts unassembled. The entire assembled unit works as a single appliance. The fan must only operate in the upright position. Any other position will be hazardous. Unpack all parts from the package and place them on the floor. Holding the (15) Base (with the (14) Base Cover attached on top), insert the (13) Outer Pole containing the (11) Extension Pole onto the (15) Base and tighten it with the “7-shape”... - Page 7 • Insert the (4) Fan Blade through the (7) Motor Shaft. Wiggle the wedge groove at the back of the (4) Fan Blade onto the Space Pin of the (7) Motor Shaft. • Secure the (4) Fan Blade to the (7) Motor Shaft by tightening the (3) Blade Cap anti-clockwise.
-
Page 8: How To Use
HOW TO USE Insert the plug directly into the wall socket. Switch the socket switch ON. To turn ON Press the ON/OFF Button & Speed Button on the Control Panel or the SPEED/ON Button on the Remote Control. (optional) Select the desired time for the appliance to be in operation between 0 to 60 minutes if you wish. -
Page 9: Specification
SPECIFICATION Model PPFS30 Voltage 220-240V ~ Frequency 50/60Hz Power... -
Page 10: Warranty
However, if the customer still requests that the defective appliance be repaired, PowerPac Electrical Pte Ltd may, at its discretion, repair the appliance but impose a labour charge, as well as the costs of the replacement parts, to be borne solely by the customer.
Need help?
Do you have a question about the PPFS30 and is the answer not in the manual?
Questions and answers