Page 1
TOWER FAN 46” with OSCILLATION and REMOTE CONTROL PPTF460 Note: This Instruction Manual must be read fully before using the appliance, and retained for future reference.
Page 2
Parts & Description LIST OF COMPONENTS Control Panel Display Air Outlet (Front Grille) Air Inlet (Back Grille) Handle (Rear) Remote Control Base (2 parts) Control Panel LED Display Air Outlet (Front) Air Inlet (Back) Handle (rear) Remote Control Base (removable)
HOW TO ASSEMBLE Warning: DO NOT operate the fan with any of its parts unassembled. The entire assembled unit works as a single appliance. The fan must only operate in the upright position. Any other position will be hazardous. 1. Unpack both parts of the package and place them on a table. 2.
Page 4
6. Insert the Main Body and the power cable through the hole in the middle of the Base. 7. Attach the Knob Screw and rotate it clockwise to lock it into place. 8. The assembly is completed. Invert the appliance and rest the Base on a horizontal, stable and dry surface.
Page 5
Warnings ATTENTION : Read this booklet carefully as it contains important instructions for a safe installation, use and maintenance. Important instructions to be kept for future reference. The following basic precautions should always be followed when using electrical appliances: 1. Read all instructions before using the appliance. The Appliance 2.
Page 6
Location 10. This appliance is NOT suitable to be used or stored near heat sources (open flame, ovens, heaters, stoves, etc.) and/or in an explosive environment (in the presence of flammable substances such as gas, vapour, mist or dust, in atmospheric conditions when, after ignition, the combustion is spread in the air).
Page 7
h. Press the SPEED button repeatedly (Low – ‘1 / 2 / 3’ – High) to the fan speed you desire. i. (optional) Press the MODE button to set the fan into Normal (default), N atural & Sleep modes. j. Press the OSC button to set the fan oscillating side to side, sweeping an arc across the room.
Page 8
19. Plug and unplug the power cable firmly holding it with dry hands. Always unplug the power cable to avoid overheating and avoid stretching it (DO NOT pull it, tug it or use it to drag the appliance to which is connected). 20.
Page 9
HOW TO USE 1. Insert the plug directly into the wall socket. Switch the socket switch ON. To turn ON 2. Press the POWER button. The LED Display will illuminate showing the ambient temperature and a beep will sound. 3. (optional) Press the TIMER button. The Timer can be programmed to operate between 0 to 12 hours.
HOW TO CLEAN 1. Switch the appliance OFF. Wait for the appliance to cool down completely. 2. DO NOT attempt to disassemble the appliance. Warranty will be voided in such instances. 3. Clean the exterior parts of the fan thoroughly with warm water & dish-washing agent and a damp cloth, and immediately wipe dry.
DISPOSAL: Do not dispose this appliance as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. SPECIFICATION MODEL PPTF460 RATED VOLTAGE 220 – 240 V ~50 – 60 Hz POWER 55 W...
3. This warranty does not cover the repair or replacement of part/s damaged by misuse, accidents, negligence, alterations, or modifications in any way, or repairs done by any repair organisation without the prior consent of PowerPac Electrical Pte Ltd. 4. Repair and service are to be performed at: 5 Changi South Lane #03-01 Singapore 486045.
Page 13
In accordance with the terms and conditions of this limited warranty as stated above, PowerPac Electrical Pte Ltd, at its expense shall provide free services for the appliance within the warranty period from its date of purchase from our Authorised...
Need help?
Do you have a question about the PPTF460 and is the answer not in the manual?
Questions and answers