True Innovations 43681 Operating Instructions

OPERATING INSTRUCTIONS
1. To Adjust Seat Height:
While seated, lean forward and reach under the
right side of the chair to find the handle. Lift the
handle and raise your body up slightly to allow the
chair to rise to the desired height. To lower the
seat, lift the handle while applying more weight
downward on the seat. The chair will descend until
the handle is released or the chair reaches the
bottom position.
2. To Operate Tilt Lockout:
While seated, reach under the right side of the
chair to find the height adjustment handle. Pull the
handle all the way out (away from the gas lift) to
allow the chair to tilt backwards. To lock the chair
in the upright or vertical position, sit upright and
push the handle in towards the gas lift.
3. To Adjust Tension on the Tilt
Mechanism:
Reach under the front center of the chair, grasp
the round knob and turn counter- clockwise to
make the tilt mechanism firmer (stiffer). To make
the tilt mechanism less firm, turn the knob
clockwise until the desired resistance is found.
4. To Adjust Arm Height:
Press the buttons on the chair arms. Press the
buttons to allow the arms to move up or down
freely then release the buttons once the desired
height is reached.
Please check to ensure that you have received all the parts for the assembly of this chair. If you
find any missing or damaged parts, do not return to the store. U.S. customers are to call
1-800-379-9773 and Canadian customers are to call 1-866-789-1060 for assistance. Please note
that a receipt is required for all warranty replacements.
Service hours are: Pacific Time: 6:00 am - 5:00 pm Monday-Friday.
This chair has been tested and approved for normal use which is defined as a standard work
week of forty hours by a person weighing less than 250lbs (113KG).
Item number: 43681
TA S K C H A I R