True Innovations 44072 Operating Instructions

E X E C U T I V E TA S K C H A I R

OPERATING INSTRUCTIONS

1. To Adjust Seat Height:

While seated, reach under the right side of the chair
to find the handle. Lift the handle and raise your body
up slightly to allow the chair to rise to the desired
height. To lower the seat, lift the handle while
applying more weight downward on the seat. The
chair will descend until the handle is released or the
chair reaches the bottom position.

2. To Operate Tilt Lockout:

While seated, reach under the left side of the chair to
find the handle. When the handle is placed in the
level position, leaning back to allow the chair to tilt
backwards. Push down the handle to lock the chair
angle while the desired position is reached.

3. To Adjust Tension on The Tilt:

Reach under the front center of the chair, grasp the
round knob and turn it counter - clockwise to stiffen
the tilt mechanism. Turn the knob clockwise to loosen
the tilt mechanism. Rotate the knob until the desired
resistance is reached.
Please check to ensure that you have received all the parts for the assembly of this chair. If you
find any missing or damaged parts, do not return to the store. UK customers are to call
0-800-051-6775 for assistance. Please note that a receipt is required for all warranty replacements.
This chair has been tested and approved for normal use which is defined as a standard work
week of forty hours by a person weighing less than 250lbs (113kg).
Service hours are: UK Standard Time: 2:00 pm-1:00 am Monday – Friday.
Item number: 44072